OC & Modding Rad Placement Confusion

Why inside the cabinet? It would be better having it outside even if you want it on the top :)

Plus not too many cabinets have space inside at the top (PSU area)
 
Well Sorry For Such Less Info

Its a Stacker 810
nd its a bottom PSU

And i dont want nething outside the case as ill be Shifting a Lot + a Lotta LAN parties :eek:hyeah:

So Now Give ur Sggstins :)
ill be Cooling the CPU NB nd GFX
 
ShaTTeR said:
Hmm , but thts a STC-01 nd mine is the Normal one :|
Though i can try Screwing the PSU above ther :)
Click to expand...

arre just put the rad on top using that method :D

but for lan parties i would suggest a Thermalright Ultima 90 :)
 
Advice taken :D

Ill take a TRUE then :p But the Problem is still ther :S
I can try Putting it up But isn't it Risky?
:mad:
Darn !
Wont a PA120.2 Suffice?
 
again.. the TRUE is HUGE... not ideal for LAN lugging.. unless you wanna end up with a proccy socket which has been ripped off of your board :p.

settle for something smaller+ligher.

mebbe ultima90/ultra90
 
Front ;) Stick to a single optical drive and find a way to mount the HDD cage behind the rad - should be easy with a little modding, no cutting will be required. Install a single row of 120x25mm fans in either a push or pull fashion to give you that extra space behind for your HDD cage. Get the PA120.3 instead of a dual rad and stick to cooling just your CPU/GPU... NB doesn't really need to be water-cooled and will unnecessarily dump additional heat into your single loop (besides straining the pump).
 
Back
Top