Graphic Cards Radeon 7900 series GPUs feature liquid chamber cooling!

Status
Not open for further replies.
Gannu

Gannu

Unbanned
Juggernaut
167714ec08e2db6371.jpg


Neatly laid out in TPU - The Technology Behind AMD's New Liquid Cooling Based Heatsinks - techPowerUp! Forums

OEM link - Home - Vapro, Inc.
 
Whoa thats awesome so from now on we dont need to look at third party's for liquid cooling solution ? and with this HS i think Overclocking can be easily done without any extra cooling solutions.

will this be availlable on mid end 7 series card too?
 
^Amen to that! Although it looks good on paper, there are several questions that need answers. How reliable is this tech. first? What if the liquid inside the chamber leaks due to some manufacturing defect? Is it electrically non-conductive to avoid shorting? For the usual vapor chamber cooled GPUs, the dryout happens over an extended period of usage say 5 years or more if the heat load is severe and consistent. What about the liquid chamber?
 
^^^ the image in the first post itself clearly shows the diff. between the previous vapour chamber tech and the newly implemented liquid chamber tech.

_
 
doubt here...

in the normal position of a Cabinet,the GPU core is on the underside of the GPU Card. so if u fill the "chamber" with liquid,wont the "pool of liquid" be at the bottom of the chamber and not in contact with the part of the chamber(ribs) in contact with the core? unless u fill the WHOLE chamber with liquid,in which case there is no basis for the "condensation" theory
 
AMD Entry-Level HD 7000 Are Just a 28nm Die Shrink of the HD 6000 Cards

AMD Entry-Level HD 7000 Are Just a 28nm Die Shrink of the HD 6000 Cards

A new slide detailing AMD's upcoming entry-level Radeon HD 7000-series graphics processors made its way to the Web, revealing that these are nothing more than a die shrink of the current Turks and Caicos cores.

The slide appeared on the Chinese Chiphell forum and describes AMD's dual-GPU support for the company's current Llano APUs.

In addition to the names of the current Radeon HD 6000-series graphics cards compatible with AMD's Hybrid graphics technology, the document also reveals the designations of some new 7000-series GPUs and the cores that these are based upon.

According to this info, the budget HD 7000-series GPUs in AMD's lineup will be noting more than 28nm die shrinks of the current Radeon HD 6000 graphics card.

This was to be expected from a couple of reasons, the most important being that AMD needed to retain the VLIW5 architecture for some of its next-gen cards for Hybrid graphics to work together with Llano APUs.

In addition, this move also allows AMD to identify and resolve all the issues caused by the transition to a new manufacturing node.

AMD entry-level Radeon HD 7000 GPU lineup
Enlarge picture
The chip maker has done this before with the HD 4770 when it moved to 40nm, and the Turks and Caicos-based Radeon HD 7000 parts serve a similar purpose.

Outside of these entry-level GPUs, AMD will also release a series of mid-range and high-end solutions, the former using the VLIW4 architecture introduced with the Cayman core (Radeon HD 6900-series), while the latter will be based on the Next-Generation Core (NCG) arch.

These GPUs will use the Tahiti GPU and it has been recently uncovered that they will pack a 384-bit wide memory interface, while also being compatible with the PCI Express 3.0 standard.

No details regarding the release of any of these graphics processors are available at this time.
Click to expand...

Source: AMD Entry-Level HD 7000 Are Just a 28nm Die Shrink of the HD 6000 Cards - Softpedia
 
Status
Not open for further replies.
Top Bottom