I've been researching everything about buying and building a new computer for the last two weeks, but i still don't understand much about RAM. i just baught a Fatal1ty AN8 NF4 SLi motherboard.
Here are some quick specs on it:
Processor
- Supports AMD Socket 939 Athlon 64/64FX & Athlon 64 X2 dual-core Processors
- With 2GHz system bus using Hyper Transportâ„¢ technology
- Supports AMD CPU Cool ‘n’ Quiet Technology
Chipset
- NVIDIA NF4 SLI single chip
- Integrated NVIDIA Gigabit Ethernet and NVIDIA Firewall
- Supports NV SATA 3G RAID
NVIDIA SLI Technology
- Two PCI-Express X16 slot support NVIDIA Scalable Link Interface
- Increase bandwidth of the PCI Expressâ„¢ bus providing 60x the bandwidth of PCI
Memory
- Four 184-pin DIMM sockets
- Supports dual channel DDR400 non-ECC un-buffered memory
- Supports maximum memory capacity up to 8GB
NV SATA RAID
- Serial ATA 3Gbps data transfer rate
- Supports SATA150 RAID 0/1/0+1
Internal I/O Connectors
- 2 x PCI Express X16, 2 x PCI Express X1, 2 x PCI slots, 1 x AudioMAX
- Floppy Port supports up to 2.88MB
- 2 x Ultra DMA 133/100/66/33 IDE Connectors
- 4 x SATA 3G Connectors
- 3 x USB headers, 1 x IEEE 1394 header
Can anyone help me out with what type of RAM to buy? I'm looking to get 2G at 2dimms most thou since the board says it can hold 8G there must be some 2G ram sticks out there. anyone have any suggestions?
Here are some quick specs on it:
Processor
- Supports AMD Socket 939 Athlon 64/64FX & Athlon 64 X2 dual-core Processors
- With 2GHz system bus using Hyper Transportâ„¢ technology
- Supports AMD CPU Cool ‘n’ Quiet Technology
Chipset
- NVIDIA NF4 SLI single chip
- Integrated NVIDIA Gigabit Ethernet and NVIDIA Firewall
- Supports NV SATA 3G RAID
NVIDIA SLI Technology
- Two PCI-Express X16 slot support NVIDIA Scalable Link Interface
- Increase bandwidth of the PCI Expressâ„¢ bus providing 60x the bandwidth of PCI
Memory
- Four 184-pin DIMM sockets
- Supports dual channel DDR400 non-ECC un-buffered memory
- Supports maximum memory capacity up to 8GB
NV SATA RAID
- Serial ATA 3Gbps data transfer rate
- Supports SATA150 RAID 0/1/0+1
Internal I/O Connectors
- 2 x PCI Express X16, 2 x PCI Express X1, 2 x PCI slots, 1 x AudioMAX
- Floppy Port supports up to 2.88MB
- 2 x Ultra DMA 133/100/66/33 IDE Connectors
- 4 x SATA 3G Connectors
- 3 x USB headers, 1 x IEEE 1394 header
Can anyone help me out with what type of RAM to buy? I'm looking to get 2G at 2dimms most thou since the board says it can hold 8G there must be some 2G ram sticks out there. anyone have any suggestions?