PC Peripherals recommend some rams for sandy bridge

Status
Not open for further replies.
babloos

babloos

Contributor
guys my current doesn't work with sandy bridge i52500k,

need new rams for gaming budget 3-4k can increase if it helps in gaming

minimum requirements 4gb,1600mhz
 
^I'd a pair of G.Skill PI Black sticks sourced from Newegg via KMD - they went bad after a year. Had it replaced directly from G.Skill, Taiwan.

Download the RMA form from here, fill the required details of your modules (doesn't matter if you don't have the invoice/bill from Newegg) and send it to:

Code: 
rma@gskill.com
[email]albert@gskill.com[/email]

G.Skill will revert back with the RMA code within 3 days. Pack the modules and send it back to the address mentioned in their response to your email. I sent my modules through Registered Post. Cost me Rs. 183. Reached Taiwan safe and sound in a week's time. And the replacements arrived a week later via DHL (had requested them to send it via DHL).
 
I dunno if the rams went kaput,they worked perfectly with old rig,i think it's compactbility issue

it had even with my previous i5 760, one stick use get recognise, another didn't after I changed my mobo to asus everything was fine

this time both the rams are not working with asus board,tried my friends dynet 1333 2gb stick worked without any

problem. also my current ram is not listed in qualified

iam using gskill f3-12800cl9d-4gbnq 1600 mhz cl9-9-9-9-24 1.5v
 
^Did you try your G.Skill sticks with your friend's setup? Try booting the system with individual sticks. Better still, use Memtest 86+ to confirm that the sticks are bad.

I do not see an issue why your present sticks can't work with the SNB setup you have ATM.
 
bro tried every method pc won't boot,no display.sending.this rams to friends place

--- Updated Post - Automerged ---

anyway iam thinking ripjaws 4gb cld8 1600 mhz for 3.8k if iam lucky same config on ripjaws x series
 
^Anyhow, get the older pair replaced while you can buy and install the newer sticks. You can sell the replacements when they arrive.

Good luck!
 
try out some difference RAM sticks from your friend's rig on your board.. it could be that the board might be defective.. just a suggestion before you buy the new sticks..
 
tried single stick on both blue sockets it works, actually it's from local shop just for testing,i don't think they will give it to home for config, anyway my friend will be sending gskill trident will get tommaow hopefully, it's hard to get ddr3 at my place

also I think my rams are fine somehow they are not.compactble with i5s,i think board is fine,it worked on my amd systems without any problem
 
Status
Not open for further replies.
Top Bottom