gaganjain
Adept
The new SST-ST1500 has a full modular design, extra long cables with short kit option for small chassis install and most importantly, it has a total of eight +12V rails with 25A max and 30Amps of peak power. These numbers add a total of 1320W/110A of maximum combined output, and 1440W/120Amps of peak output on +12V rails.
The PSU has single 24-pin MB connector, two 8-pin EPS, four 6-pin and four 8/6-pin PCI-Express connectors, twelve SATA, twelve 4-pin peripheral and four 4-pin floppy connectors. The good thing is that all of these are modular so you can plug in the ones you need, otherwise it would be a big mess with so many cables.
The entire PSU is cooled by a single 135mm ball bearing fan that produces between 19 and 34dBA of noise depending on the speed.
You can check out more details here
The PSU has single 24-pin MB connector, two 8-pin EPS, four 6-pin and four 8/6-pin PCI-Express connectors, twelve SATA, twelve 4-pin peripheral and four 4-pin floppy connectors. The good thing is that all of these are modular so you can plug in the ones you need, otherwise it would be a big mess with so many cables.
The entire PSU is cooled by a single 135mm ball bearing fan that produces between 19 and 34dBA of noise depending on the speed.
You can check out more details here
