Urgent os installation help needed..

H

harshit143

Level F
I am trying to install windows 7 on my new asus 1015cx for the very first time and i am getting this error before the installation starts,just after it says "starting windows" in the bottom bar.

"A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /f to check for hard drive corruption and then restart your computer.
Technical information:
STOP: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000)"

Please help what should i do. I am really worried if the hdd is damaged. I tried with xp also and getting the same error on a blue screen.
 
jc36lect3r said:
Looks like a bad hard drive

How To Fix STOP 0x0000007B Errors (INACCESSIBLE_BOOT_DEVICE)

Is it out of warranty?
Click to expand...


its just 2 days i have bought the netbook

---------- Post added at 04:27 PM ---------- Previous post was at 04:22 PM ----------
jc36lect3r said:
Looks like a bad hard drive

How To Fix STOP 0x0000007B Errors (INACCESSIBLE_BOOT_DEVICE)

Is it out of warranty?
Click to expand...

The link you have given suggests to perform CHKDSK in my HDD according to the error shown. How can i enter DOS and Run CHKDSK?? It have some asus web OS installed

---------- Post added at 04:28 PM ---------- Previous post was at 04:27 PM ----------
jc36lect3r said:
Looks like a bad hard drive

How To Fix STOP 0x0000007B Errors (INACCESSIBLE_BOOT_DEVICE)

Is it out of warranty?
Click to expand...

The link you have given suggests to perform CHKDSK in my HDD according to the error shown. How can i enter DOS and Run CHKDSK?? It have some asus web OS installed
 
Go through the link posted above,
got this from the link:

Change the SATA mode in BIOS to IDE mode. Disabling some of the advanced features of SATA drives in BIOS could stop the STOP 0x0000007B error from showing up, especially if you're seeing it in Windows XP or during a Windows XP installation.

Note: Depending on your BIOS make and version, SATA mode may be referred to as AHCI mode and IDE mode may be referred to as either Legacy, ATA, or Compatibility mode.

Note: While not a common solution, you may also want to try the reverse - see if IDE mode is selected in BIOS and if so change it to AHCI, especially if you see the STOP 0x0000007B error in Windows 7 or Windows Vista.


check and let us know
 
Back
Top