Hello!
My good ole MT882 is giving me trouble, so I switched back to the WA1003a..
My MT, was connected to a G125 with tomato. I now want to make the G125 into a repeater/range extender.. I think this is WDS right?
I managed to set both the SSid's to the same thing, same network key,
and on the tomato side enabled ap + WDS, and disabled LAN/DCHP, also put the WA's Wifi MAC in the G125's link to column.
I can now connect to either of the networks depending on the signal strenght, but when i connect to the G125, I dont get net(unable to connect to the other modem)
Could someone pl help me out?
tks.
Router1 : WA1003a
LAN IP: 192.168.1.1
ssidsame
networkkeysame
DCHP enabled
Router2: G125
LAN IP: 192.168.1.2
ssidsame
networkkeysame
DCHP disabled
My good ole MT882 is giving me trouble, so I switched back to the WA1003a..
My MT, was connected to a G125 with tomato. I now want to make the G125 into a repeater/range extender.. I think this is WDS right?
I managed to set both the SSid's to the same thing, same network key,
and on the tomato side enabled ap + WDS, and disabled LAN/DCHP, also put the WA's Wifi MAC in the G125's link to column.
I can now connect to either of the networks depending on the signal strenght, but when i connect to the G125, I dont get net(unable to connect to the other modem)
Could someone pl help me out?
tks.
Router1 : WA1003a
LAN IP: 192.168.1.1
ssidsame
networkkeysame
DCHP enabled
Router2: G125
LAN IP: 192.168.1.2
ssidsame
networkkeysame
DCHP disabled