SeaTools Desktop v3.02.04
Copyright (c) 2005 Kroll Ontrack Inc.
5/11/2006 @ 7:17 PM
The following information has been generated by SeaTools Desktop. Use
this information to help you recognize and resolve potential data access
problems.
System Information:
BIOS Date 11/12/03
Conventional Memory size 639 K
Extended Memory size 58532 K
IO Channel type PCI
Drive Information:
SIZE MODEL
--------- ---------------------
80 GB ST380011A
Serial Number = 3JV700G2
Int13 Num = 80, PHYS CHS = 16383x16x63.
ParmTable CHS, Rsvd = 9729x255x63
PARTITION CYLINDER SIZE
---------- ------------ ----
# Type Start End MB
EXTENDED
1 NTFS 1 1275 10487
EXTENDED
2 NTFS 1276 2039 6284
EXTENDED
3 NTFS 2081 5199 25155
PRIMARY
4 NTFS 5099 9727 38077
Diagnostic Results:
ATA Full Test Result: Passed
Results from Seagate's DiagATA/SCSI:
-----------------------------------------------------------------
DIAGATA.EXE Version 3.08.50629ML
Copyright (c) 2002-2005 by Seagate Technology LLC. All rights reserved.
-----------------------------------------------------------------
Timer Resolution: 0.000122
Long Test Begin: 11-May-2006 18:36:48
Cable Test - 0 Errors
Buffer Test - 0 Errors
Identify Data
Model Number: ST380011A
Serial Number: 3JV700G2
Firmware Revision: 3.06
Default CHS: 16383-16-63
Current CHS: 16383-16-63
Current Capacity: 16514064 Sectors
Total Capacity: 156301488 Sectors
Conductor Cable Reported
ID Method: Jumper
SMART Enabled
SMART Check: Passed
Full Scan (0 to 156301488) - Passed
Elapsed Time: 37.50 Minutes
Estimated Internal Transfer Rates
Min: 50.31Mb/s Max: 450.14Mb/s Avg: 298.35Mb/s
PIO/DMA Data Compare
Total Bytes = 17863680
Estimated PIO Transfer Rates
Min: 2.00MB/s Max: 2.10MB/s Avg: 2.05MB/s
Estimated DMA Transfer Rates
Min: 25.15MB/s Max: 31.44MB/s Avg: 30.41MB/s
Long Test Passed: 11-May-2006 19:14:28
SMART Disabled
-----------------------------------------------------------------
End results from Seagate's DiagATA/SCSI
File Structure Test Result:
Partition 1 (NTFS (10.4 GB) Terminator II & III) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more files were missing security information
- One or more errors were found in the index
- One or more errors were found in metadata file records
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 2 (NTFS (6.2 GB) Rag) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 3 (NTFS (25.1 GB) Dumps) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
- Other errors were found
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
Partition 4 (NTFS (38 GB) ) Result: Failed with critical Errors
The following errors were found while scanning the volume:
- One or more errors were found in the index
- One or more errors were found in metadata file records
NOTE: Any report of possible errors in the file system tests are for
informational purposes only. We suggest you should consider testing with
the official file system diagnostic utilities for your operating system.
Seagate is not able to assist with troubleshooting or reviewing
file system test results.
******************************************
Recommendation:
All selected physical diagnostics passed.
If you are not experiencing data loss and SeaTools reports File
System Structure errors, they may be caused by a lock-up or
failure to shutdown Windows correctly. Many times, these errors
may be repaired through normal system maintenance which
includes using the Windows provided "Defrag" and
"Scandisk / Chkdsk / Error Checking" utilities.
If you are experiencing a hardware error, you should isolate
the cause and replace the failing component. If you are unsure how
to proceed with repairs, contact a computer professional. After
completing any maintenance tasks, run SeaTools again to
verify that all errors have been repaired. If errors continue to
occur, the system may not be stable. Again, contact a computer
professional.
========================================================