PC Peripherals Zebronics Avid cabinet

A

Abhii

Recruit
Hello everyone

I have bought Zebronics Avid cabinet..which has 4 led rainbow fans...

Each fan consists of two ports that are female ports....
1. Molex 4 pin
2. 2 pin square port

So i already know that molex will be connected directly to the psu

But what about the the 2. Pin connecter....where to connect that....if in case it is to be connected to an external rgb controller...can you provide me with a link...of that connector...as i am not able to find the right one.

Thanks
 
The 2-Pin square ports go into the fan headers present in your motherboard. If your motherboard don't have enough fan headers, then you need to get a fan-hub.

You'll need a fan-hub, such as this:
www.primeabgb.com

DEEPCOOL FH-04 4 PORTS FAN HUB DP-FH04PWM-HUB

DEEPCOOL FH-04 4 PORTS FAN HUB DP-FH04PWM-HUB Overview : *Controls the fan speed of up to 4 PWM-capable fans. Supports 3- and 4-pin fans. Cable management Easy to install
www.primeabgb.com www.primeabgb.com
This has 4 ports.

There's also another one from Deepcool (FH10) which has ten ports but costs over 1K INR.
 
Back
Top