My rig,
P4 2.8E
Intel 865GBF
80GB SATA HDD
40GB 7200HDD
EVGA 6800GT with NV5 silencer
Sony DVD-R
2*Vantec HDD cooler
Antec Triled Fan and Internal LED tube
4 LED case fans
X-connect Modular PSU
Thermaltake Xaser III Full Tower
Creative 2.1 speeakrs
Samsung 17" 763DFX
Vantec Illuminated mousepad
Elumnix illuminated keyboard
hey daviescool good to see you here.
I was just wondering, hows that Evga holding up with NV5?
Man these evga cards are sick, overclocks better than many gainward GS.
I know the card i sent you is good overclocker. But hows it doing after NV5?
The one I have is going over 425 without any bios mod.
My Rig
Athlon 64 3200
Asus A8V Deluxe
1GB Trascend DDR 400 512x2
Samsung 19"Flat Monitor
XFX Geforce 6800GT
1XSony DVD ROM, 1X Samsung CD RW
Generic Keyboard, black
Logitech Optical Mouse
Creative FPS 1500
1xseagate 160GB SATA
1xseagate 160GB IDE
1xSeagate 80GB IDE
Powersafe 400Watts PSU
whoa switch when the heck did you get that rig ?? sweet
WHOA …davies"REALLY"cool 
nice rig switch…
now where will i get some led fans
Rocking rig Switch !
Thanks guys
@bottle I have been waiting for the rig from like December but plans got delayed due to some unavoidable reasones. I got the parts couple of days back. Right now i am just trying the rig out. Would stress test it coming tuesday cause thats my holiday. Would post few benches then. I am plaiing to buy a Zalman cooler and an VGA silencer but than again i might just not do it as the nose levels are low inside the rig and its fast enough as of now so dont really need to overclock.
@blade… I wonder why arn’t you surpised ;)…
Me drools and congratulates switch, reads specs again and faints, regains consciuosness starts drololing again and explodes all over the place 
hey all,
Thanks for the comments. Hey Funky, nice to cu 2. The card was runnin stable 425/1140 though 420/1120 is I think right for this card. Temps are always hovering between 54-61c, 61 on load with the NV5. sure is a good oc’r
Cool rig there Switch.
One suggestion though.DO NOT use Powersafe 400 Watt PSU in your current setup.Get Antec.Even though Powersafe is good,it is insufficient for your setup.
Actaully the 160 IDE would be giving way for my second PC and i would also be removing one of the optical drives… So i think it wouldnt matter that much… I dont feel any problems with Powersafe as of now(Also i am not thinking about Overclocking this) but i would keep an eye. Need to buy some other stuff before the PSU.
COngratulations Switch.. cool rig.. 
My Rig
Pentium 4 2.4 Ghz
Intel 865GBF Motherboard
256x2 MB RAM 266 MHZ (HYNIX)
LG 17" MONITOR
ASUS GEFORCE 4 440MX 128 MB
LG COMBO DRIVE DVD-R/CD-RW
LOGITECH WIRELESS KEYBOARD AND MOUSE
1XSEAGATE 40 GB HDD 7200 RPM
UNKNOWN BRAND PSU 350W.
My Config isnt one that i boast about but its a nice computer that manages about 3-4 fps in DOOM 3 at ultra quality 
I dont know how but it does…
I m going to upgrade to XFX Geforce 6600GT 128MB GDDR3 EDITION the next week and also buy TRANSCEND RAM 1024 MB RAM 400 MHZ WITH A 160 GB HDD.
I would be a happier member then.
Heres mine:
Tbred-B@9.5X200=1.9GHz(I guess its a 2500+)
A7N8X-X,
2X256mb KVR PC2700+256MB hynix d43,all at 400mhz 2.5-3-3-11,
XFX 5700LE 256MB@425/505(my gf3 fried a lil too soon or I would have waited for a GF6 
),
Philips 17" monitor(two of 'em actually coz its under replacement… )
Creative SBS370
A “colorsit” PSU rated 400W though I suspect its closer to 250W 
(a finex “350w” rebooted my system ,this doesnt-go figure,most psus in India are not even capable of a 60% load I guess)
Samsung SP0802N,80GB,7.2k rpm
LG8481B@8520B CD-RW
Lite-ON 167T DVD-ROM
Logitech Keyboard+Frontech optical mouse
And Epson C43sx+Benq 3400u scanner
Just put together this one couple of days back
AMD64 3200+ Winchester
Asus A8V Deluxe
2X512 Corsair Value Select
BFG 6600GT AGP card
AMD64 3200+ Winchester
Asus A8V Deluxe
2X512 Corsair Value Select
Cost of all these(each componenet individually)
where did you get the ram from and for how much… what are the timings on it…
well here’s mine…
Pentium4 3ghz
512mb ram(400mhz)
Intel 865gbf mobo
ATI radeon 9600
LG 17" flatron
Micorosoft basic scroll optical mouse
TVS gold keyboard
Samsung CD writer
Samsung DVD rom
180gb hdd+1160gb hdd(seagate)
PerX 350w PSU
IBOX cabinet
I got most of the components from USA. The motherboard was bought in Delhi for 8.5K.
Value Selects are quite cheap but they are not good for OC. My timings are:
CAS Latency CL=2.5
Row Cycle Time tRC Bios Default
Row Refresh Cyc Time tRFC Bios Default
Ras# to CAS# delay tRCD 3
Row to Row delay Bios Default
Min Ras# Active Time tRAS 6
Row Precharge Time tRP 3
Write Recovery Time Bios Default
Write to Read delay Bios Default
Read to Write Delay Bios Default
Refresh Period tREF Bios Default
Enable 2T Timing Disabled
Everest memory benchmarks:
Memory Read: 5671 MB/s
memory Write: 1541 MB/s
Memory Latency: 51.3ns
My rig
AMD Athlon 64 3000+
XFX Geforce FX 5200
Asus K8v Motherboard.
Hynix 512 Mb DDR Ram @ 400Mgh