WTB 120 - 150W 8 - 19V DC Barrel Adapter

  • Notice: Market Section Posting Privileges

    Dear Guest,

    We appreciate your interest in participating in the Marketplace. To maintain a safe and reliable trading environment, posting privileges are granted only to users who meet the following criteria:

    • Minimum 25 forum posts in technical sections
    • Account age of at least 30 days

    Alternatively, you can gain accelerated access by upgrading to Enclave Plus Membership, which includes additional perks and privileges.

    If you have any questions or wish to learn more about becoming an Enclave Plus member, please feel free to reach out to us using the 'contact us' form in the footer..

Status
Not open for further replies.
Hi,
DC barrel adapters are referenced in mm for the size, so if you do have a sample picture let me know, I can make you one for you :)

Regards
 
  • Like
Reactions: ibose
b.life said:
Hi,
DC barrel adapters are referenced in mm for the size, so if you do have a sample picture let me know, I can make you one for you :)

Regards
Click to expand...
Thanks for the offer. I should have been more clearer. I was looking for an external power brick with plug similar to the ones available for laptops. This is for an old Intel DN2800MT board powered with an 8-19 V DC external power supply though the DC jack on the back panel. This connector accepts dual-barrel plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +8 V DC (±10 %) through +19 V DC (±10 %) and the shell is Ground. The maximum current rating for this connector is 8 A.
 
Are you looking for this? Entire brick or just the connector?
If just the connector, I can send you one, I do have it, let me get you a picture.
The left one is a diy one I made for something which I don't remember, and the right one is a pre-made one. Both of them have free wire at the other end. The top one is free wire to 5.5x2.1 converter.

5.5x2.1.jpg

Edit 1: Picture attached
 
Last edited:
  • Like
Reactions: ibose
I recently upgraded my Lenovo 170w laptop adopter.
It has a flat pin. You can however cut it off anw get what you need.
Let me know if that works for you.
 
Status
Not open for further replies.
Top Bottom