CPU/Mobo ABit Blues

[saROMan]

lol which gpu card are u using check if u gpu card is not working make sure try another gpu card from u friend

if u psu has 24 pin unknown brand try if work with another friend gpu card

if u hdd not working then unplug the cable try boot if the cpu fan and gpu fan spring

I am having a 9600 GSo and its working just fine..checkd it twice..:bleh:

lol which gpu card are u using check if u gpu card is not working make sure try another gpu card from u friend

if u psu has 24 pin unknown brand try if work with another friend gpu card

if u hdd not working then unplug the cable try boot if the cpu fan and gpu fan spring

:huh: well never thaught of that..worth a try...will check n update ...thx bro:clap:

u supplied the board with 12v 8pin connector or 4pin??.

4 Pin ..coz both my Local as well as VIP come with 12V 4 Pin connector..also as long as the Psu is Aux 12V 2.0 and above ..i dont think it sud b a preoblem

I think the board is shorting somewhere. check if its making contact anywhere to the backplate. try running it out without a cabinet. Proably with the mobo seated on its cardboard box. Make sure you take proper precautions before you attempt this.

hmm lemme chk..

power on the board and just move the monitor plug that u connected to the gpu frm side to side.it should post.

I am not sure what exactly u mean by that...cud u explain it to me ..:ashamed:

 

[Sudarshan_SMD]

ABIT IP35-E needs 8pin 12V connector.
ur mobo might be short of power coz of that 4pin connector .
get a good quality PSU frm. friends for testing(must have 8 pin connector)...then see if it's working or not .

and if it does not work .....straight way get board replaced .

n i think there is GREEN light for LED on mobo..not RED one .....

so most probably PSU is a problem...coz mobo requires 8pin connector .

 

[saROMan]

ABIT IP35-E needs 8pin 12V connector.
ur mobo might be short of power coz of that 4pin connector .
get a good quality PSU frm. friends for testing(must have 8 pin connector)...then see if it's working or not .

and if it does not work .....straight way get board replaced .

n i think there is GREEN light for LED on mobo..not RED one .....

so most probably PSU is a problem...coz mobo requires 8pin connector .

I Seriously Doubt that...:no: coz 1 of my frnd is having a CM 500/600 E Extreme PSU which has a 4 Pin connector and is using it with his Asus Wifi mobo w/out any problem, also Abit Manual suggests that either 4/8 Pin connector wil do, provided the PSU is Aux 2.0 and above ....also the LED on my Mobo is RED and not Green:ashamed:

 

[djmykey]

I Seriously Doubt that...:no: coz 1 of my frnd is having a CM 500/600 E Extreme PSU which has a 4 Pin connector and is using it with his Asus Wifi mobo w/out any problem, also Abit Manual suggests that either 4/8 Pin connector wil do, provided the PSU is Aux 2.0 and above ....also the LED on my Mobo is RED and not Green:ashamed:

There is a Green as well as Red one on my board

 

[Sudarshan_SMD]

There is a Green as well as Red one on my board

so which one glows .......when board is on ?

i saw some pics......there i was only able to spot GREEN one.

I Seriously Doubt that...:no: coz 1 of my frnd is having a CM 500/600 E Extreme PSU which has a 4 Pin connector and is using it with his Asus Wifi mobo w/out any problem, also Abit Manual suggests that either 4/8 Pin connector wil do, provided the PSU is Aux 2.0 and above ....also the LED on my Mobo is RED and not Green:ashamed:

just try with another PSU ...........coz connecting 4PINS instead of 8PINS .......is simply we can say underpowering ur mobo .

 

[Nemesis_41]

did u try clearing the cmos ? .. possibilities of display not working, hope you've tried checking the gfx card on other boards as well.
I see, you have dynet as well as OCZ? .. did u start the system with 2 different brands of rams ?
It happened to me too, but that was an issue with moisture during rainy season. Had to start it off by using a hairdryer :lol:

ROFL....=))

 

[H2O]

I'd say time to take that board for RMA

 

[djmykey]

so which one glows .......when board is on ?

Both. Actually they r near one another.I took 3 pics to show you. They r from a 2MPix cam so please forgive the quality. The middle pic got a flash blast so I took the last pic without a flash.

 

[saROMan]

Its Official .. the board has gone Kaput .. have tryed every thing ...tryed to start using just PSN n no other devices ....not working ....tryed with just 1 Ram module...not working ...time for RMA:ashamed: ...damn why me :huh: ...ne ways thanks a lot guys for ur suggesions ....
Edit :

Originally Posted by djmykey
There is a Green as well as Red one on my board

ROLF :tongue:

 

[saROMan]

Sorry for bumping the old thread but just got word from Tirupati that the board is working just fine :ashamed: ....now i donno wats wrong ...my diagnostic or theres ... guess will have 2 start the Troubleshooting process 1 more time... ..... 2 quick questions, Is Tirupathi Reliable ???? and does Palit 9600 GSO have any issues with Abit ???:ashamed:

 

[Rockfella]

^ Tirupathi is reliable. Just check the mobo in front of your eyes. See if u missed something while doing it yourself. Sometimes all you need to do it insert RAM stick again, try that lol....