airtel fiber on bridge mode ?

[captivating]

has anyone tried using airtel fiber on bridge mode ? If yes then please share the complete process and settings so that I can connect my own router .

 

[wakkun]

@anmolbhard004 can guide you through the whole thing, you'll need to invest in some hardware though.

 

[lockhrt999]

It's horrible.

For me,
This link gave the direct access to router admin panel.

https://192.168.1.1/web_whw/#/wifi/wifi-networks

Username is admin
Pass is Airtel@123

See if bridge mode is available there. Otherwise you'll have to contact Airtel customer care and maybe after a month they'll activate it.

 

[chetansha]

I have airtel firbre and for me They did it on the nokia modem via backdoor

 

[inc0d3r]

Most of the Airtel modems are locked these days. Just call 121 and place a request for the same. If they ignore just threaten them to quit the connection and they will.

 

[gourav]

Why do you want to use bridge mode? You can use your own router without setting Airtel router in bridge mode. Just connect airtel route's LAN port to your router's WAN port and set your router to dynamic IP mode.

Unless you're trying to access your home network from outside, there isn't going to be any difference between the two setups.

 

[lockhrt999]

Why do you want to use bridge mode? You can use your own router without setting Airtel router in bridge mode. Just connect airtel route's LAN port to your router's WAN port and set your router to dynamic IP mode.

And disable the Wi-Fi on Airtel. This is what I did. Ek ghar me do wife nahi.

 

[captivating]

For me I called them and after 10 mins I got call from there team and then within 2 mins they activated bridge mode . I asked them on which port the bridge mode is active they said all ports . Then I asked them what login info I shall use to enable internet on my personal tp link router , he said he doesn’t know.

Then I looked at the internet and found out that username is your dsl number and password in your account number but I tried that but internet is not working .

 

[chetansha]

For me I called them and after 10 mins I got call from there team and then within 2 mins they activated bridge mode . I asked them on which port the bridge mode is active they said all ports . Then I asked them what login info I shall use to enable internet on my personal tp link router , he said he doesn’t know.

Then I looked at the internet and found out that username is your dsl number and password in your account number but I tried that but internet is not working .

In the routerHave you set wan connection to Pppoe ?
And did you disable DHCP on modem,