41-50k Building a Rig not for gaming but for prototyping machineries using inventor

Status
Not open for further replies.
M

makeiteasy

Beginner
Hi all,

I want to build a rig with high end configuration. My purpose to build that rig is to prototyping the models I've created with Autodesk Inventor 2013 and simulate them using Autodesk Simulator, and see how they work. I would like to know about the Intel Extreme edition i7 Processors and boards.

Thanks a lot!
 
ALPHA17 said:
@makeiteasy, please follow this template http://www.techenclave.com/pc-buying-advice/template-what-should-i-buy-73107/p2/#post839513 and provide is appropriate details so that it is easier for us to provide you with accurate answers suited to your needs.

Welcome to TE and wish you a pleasant stay here. Cheers!
Click to expand...

Q: What is your budget?
50K - 60k

Q: What is your existing hardware configuration (component name - component brand and model)
CPU - Intel Pentium D 2.66 GHZ 2.67 GHZ (Dual Core)
Motherboard - Asus XXX
GPU - nil
RAM - Transcend 1X1GB xxxx
Monitor - HCL 17" CRT
SMPS - Mercury XXX
HDD - 80GB Seagate SATA barracuda
DVD Writer - LG XXXXX

Q: Which hardware will you be keeping (component name - component brand and model)
I dont want to keep anything, I want to buy a new one.

Q: Which hardware component are you looking to buy (component name). If you have already decided on a configuration then please mention the (component brand and model) as well, this will help us in fine tuning your requirement.
CPU - Intel i7 (i dont know about the model which best suits for me)
Motherboard - any i7 extreme edition motherboard likely the AZ series.
GPU - GTX670 or Gforce 210
RAM - 2x8GB Transcend JetRAM xxxx
SMPS & Cabinet - Suggest me one.
HDD - 2TB Seagate Sata xxxx
Monitor - LG 18.5" xxxx
KB - TVS Gold Feather touch
Mouse - Logitech

Q: Is this going to be your final configuration or you would be adding/upgrading a component in near future. If yes then please mention when and which component
Yes, will upgrade the following within 6 months
RAM - Additional 16GB 2x8GB Transcend

Q: Where will you buy this hardware? (Online/City/TE Dealer)
Open to online purchase. wherever the cost may less.

Q: Would you consider buying a second hand hardware from the TE market
No

Q: What is your intended use for this PC/hardware
Machine Design and Simulation
Multimedia & Animation
Graphics Design
Gaming

Q: Do you have any brand preference or dislike? Please name them and the reason for your preference/dislike.
No, I dont want to go for a branded pc. I know how to assemble, So I want to built my pc

Q: If you will be playing games then which type of games will you be playing?
Strategy - Age of the Empires

Q: What is your preferred monitor resolution for gaming and normal usage
Gaming - 1280x728
Desktop - 1024x768

Q: Are you looking to overclock?
No

Q: Which operating system do you intend to use with this configuration?
Windows 7 64 bit

Post me a reply soon... Thanks
 
Last edited by a moderator:
@makeiteasy, this is what I suggest --

Intel Core i5 3450 ~11000/-
GIGABYTE-B75M-D3H ~4500/-
Corsair Vengeance 8GB x2 1600MHz ~4800/-
Seagate Barracuda 7200.14 1TB ~4500/-
Sapphire HD7850 1GB ~13000/-
HP / ASUS (boxed) optical drive ~1100/-
Seasonic S12II 520W ~4500/-
Cooler Master eLite 311 Plus ~3000/-
DeLL Ultrasharp U2312M ~15000/-
APC BR-1100CI IN ~5000/-
Logitech K200 combo ~750/-

Hope this helps, Cheerio!
 
Last edited by a moderator:
Hi makeiteasy welcome to TE.

Since your needs are very specific - usage for Autodesk Inventor & Simulator (machine design & simulation). It would help us very much to also let us know your usage pattern:
1] How may hours of usage per day/week.
2] How long does your simulation tasks take (think of the maximum & worse case scenarios where your system will be running non-stop).
3] Where are you from ..... city/town [to enable us to suggest local vendors]. It is good to know that you are open to online purchase (there are many wonderful options & all of whom are reliable too)

We need this information because to build a system which can handle stress sufficiently, you will have to chose "quality components" that will survive the rigors of your work.

To start with this is what I would recommend
Power Supply : Seasonic 620W POWER SUPPLY 80+ BRONZE (S12II-620) ....... Rs 5120/- [This brand is the best..... do not ever think of Mercury, iBall, Zebronics, VIP ever ]
SeaSonic S12II 620 Bronze 620W ATX12V V2.3 / EPS 12V V2.91 80 PLUS BRONZE Certified Active PFC Power Supply

RAM: G.Skill Ripjaws X Theitdepot - G.skill Ripjaws X 8GB (1 X 8GB) DDR3 1600MHz Desktop RAM (F3-12800CL10S-8GBXL) (3380 x 2 = 6760)
Look out for G.Skill Ripjaws Z series
Again G.Skill is the best & far superior than Transcend

Rest we shall see as you provide us with further details that I spoke of.

Cheers
Terry
 
terence_fdes said:
Hi makeiteasy welcome to TE.

Since your needs are very specific - usage for Autodesk Inventor & Simulator (machine design & simulation). It would help us very much to also let us know your usage pattern:
1] How may hours of usage per day/week.
2] How long does your simulation tasks take (think of the maximum & worse case scenarios where your system will be running non-stop).
3] Where are you from ..... city/town [to enable us to suggest local vendors]. It is good to know that you are open to online purchase (there are many wonderful options & all of whom are reliable too)

We need this information because to build a system which can handle stress sufficiently, you will have to chose "quality components" that will survive the rigors of your work.

To start with this is what I would recommend
Power Supply : Seasonic 620W POWER SUPPLY 80+ BRONZE (S12II-620) ....... Rs 5120/- [This brand is the best..... do not ever think of Mercury, iBall, Zebronics, VIP ever ]
SeaSonic S12II 620 Bronze 620W ATX12V V2.3 / EPS 12V V2.91 80 PLUS BRONZE Certified Active PFC Power Supply

RAM: G.Skill Ripjaws X Theitdepot - G.skill Ripjaws X 8GB (1 X 8GB) DDR3 1600MHz Desktop RAM (F3-12800CL10S-8GBXL) (3380 x 2 = 6760)
Look out for G.Skill Ripjaws Z series
Again G.Skill is the best & far superior than Transcend

Rest we shall see as you provide us with further details that I spoke of.

Cheers
Terry
Click to expand...

Dear Terry,
here's the answers for your questions.

1] How may hours of usage per day/week.

My usage per day will nearly 8-12 Hours in the process of Designing and Assembling parts

2] How long does your simulation tasks take (think of the maximum & worse case scenarios where your system will be running non-stop).

It Depends upon what was I Designed. If the Machinery is very simple then the time consumption will be less.
If the machinery is a large one like an injection molding machine then it would be take more time to simulate.

3] Where are you from ..... city/town [to enable us to suggest local vendors].
and am from coimbatore, tamilnadu.

I've been using transcend for the past 5-8 years and the product has life time warranty. it gives me good performance and result. But I'd ever tried a G.Skill ripjaws. All of you suggesting ripjaws means, something would be there. So I made the decision to buy ripjaws. Thanks for the Post.

Cheers!

Yes your suggestion is good but i want to hear about the i7 series only.

So Please suggest me in the i7 series. dont consider the budget. I want to build the best

Thank you alpha17
 
Status
Not open for further replies.
Top Bottom