Theeeunknown
Recruit
I have an iball glam cabinet and I am going to purchase an RTX 3060. Will it fit in my case? Also does anyone have an experience buying used gpu from vishu rattan from Delhi?
Cabinet and gpu clearance help
- Thread starter Theeeunknown
- Start date
Theeeunknown
Recruit
I contacted iball and they said that the dimensions are as follows:
Length : 36.6 cm
Width : 18.8 cm
Height : 36.0 cm
theagilecoder
Recruit
Now that you have the dimensions of the case, look at the length of the various 3060 models in this link (look below in the page):
www.techpowerup.com
This should give you a good idea on the compatibility.
NVIDIA GeForce RTX 3060 8 GB Specs
NVIDIA GA106, 1777 MHz, 3584 Cores, 112 TMUs, 48 ROPs, 8192 MB GDDR6, 1875 MHz, 128 bit
Theeeunknown
Recruit
Gpu dimensions are: length: 25.8 cm width : 12.6 cm . So it will fit my case right? I am just double checking because I’m buying a used gpu from fb marketplace and he won’t accept returns.
Theeeunknown
Recruit
Can you suggest a budget case please?
ranvijaty
Recruit
Take a look at ANT Esports pc cases, they have decent airflow and come attached with fans. (Look at ones which have open mesh in front)
Antec NX292
Ant Esports ICE-112
Antec AX83
Do watch videos on these as I am not up to date w/ these cases
kalph09
Adept
Are those overall dimensions?
There's barely any info on this case. Most case manufacturers include max lenght applicable for GPU besides overall dimensions.
You might want to check something like this as an example. Max lenght is 320mm which should take most 3060s.
There's barely any info on this case. Most case manufacturers include max lenght applicable for GPU besides overall dimensions.
You might want to check something like this as an example. Max lenght is 320mm which should take most 3060s.
Deepcool MACUBE 110 (M-ATX) Mid Tower White Cabinet With Tempered Glass Side Panel R-MACUBE110-WHNGM1N-G-1
DeepCool Macube 110 Series M-ATX Form Factor Mid Tower Cabinet, Featuring Tempered Glass Side Panel, 280mm Radiator Mount, USB 3.0 Front Panels and a Well Ventilated Design for Better Airflow.
www.primeabgb.com
I normally remove the side panel when using cpu and gpu heavy work like video editing.
Later I replaced the side panel with a dust filter mesh to complete ventilation.
In case it helps for the time being.