Thanks, will check it and will get back to you.
The repair guy said cartridge, both black and colored needs replacement. Anand from Dubaria said that it is printerhead and not a cartridge in the G1000 and G2000. I couldn't find the same info or the product model number in some manual pdf that I downloaded from Canon. Any help? This is what Dubaria suggested
https://dubaria.shop/products/dubar...000-printer-combo?_pos=3&_sid=d8cbb4e57&_ss=r They didn't have the original one.
White lines started showing on the black part and now they are also showing on the non-black (colored) prints of the area too. +
@silverstar @rockyo27
Any recommended seller?
What is the meaning of modding the cartridges? CTC matlab?
P.S. Won't be doing this but just asking, do compatible inks/cartridges/printer heads etc. lessen the life of a printer?
@Silent47Assassin
Ltonline is a weird looking site. I couldn't find their email address and number on their site. Do you have the same.
Rated 1.17/5 by MouthShut users | Help millions of users by writing reviews on MouthShut.com
www.mouthshut.com
Read consumer reviews of LT Online Store. Submit your complaint to LT Online Store customer care service.
www.consumercomplaints.in
Edit- Got the number and have whatsapped, lets see.
@tech.monk @Silent47Assassin @silverstar @rockyo27
This is how the print outs look like
Now my friend said that cartridges need replacement. The guy at dubaria said that they have compatible cartridges which as per him are called printedheads in the G1000/2000 series. He also said after seeing the above photos that the issue could be something else. The printer is in a very small city. There are no good repair guys there. There are some but just like the service center they charge a bomb. The printer is about 2-2.5 years old. It was used like once or twice in a month to print 10-20 colored prints. I think this might have aggravated the issue. So, I was hoping to get whatever thing needs replacement online and then replace the same, if it could be done without much hassle, myself when I go there. Any advice?