Dear all,
Please fine tune the following configs -
Config 1
AMD AthlonII X2-240
Asus M2N68-AM-PLUS
I GB DDR2 800MHz Kingston/Transcend
Seagate 250GB SATAII 7200.12 Series
Zebronics Bijli with included SMPS -OR- Zebronics Bijli without included SMPS and FSP Saga 350W
Samsung SH-S22F SATA Optical Drive
Benq 15 inch LCD T53W
Config 2
AMD AthlonII X2-240
Biostar TA785GE
I GB DDR2 800MHz Kingston/Transcend
Seagate 250GB SATAII 7200.12 Series
Zebronics Bijli with included SMPS -OR- Zebronics Bijli without included SMPS and FSP Saga 350W
Samsung SH-S22F SATA Optical Drive
Dell E1910 IN LCD
Most probably I will be buying Config 1 but may opt for Config 2 if my final budget permits.
1. The config 1 Motherboard and monitor do not support DVI. Would it make much difference?
2. Should I invest in a separate Power Supply?
3. Will I be able to add a graphic card later to config 1?
Please fine tune the following configs -
Config 1
AMD AthlonII X2-240
Asus M2N68-AM-PLUS
I GB DDR2 800MHz Kingston/Transcend
Seagate 250GB SATAII 7200.12 Series
Zebronics Bijli with included SMPS -OR- Zebronics Bijli without included SMPS and FSP Saga 350W
Samsung SH-S22F SATA Optical Drive
Benq 15 inch LCD T53W
Config 2
AMD AthlonII X2-240
Biostar TA785GE
I GB DDR2 800MHz Kingston/Transcend
Seagate 250GB SATAII 7200.12 Series
Zebronics Bijli with included SMPS -OR- Zebronics Bijli without included SMPS and FSP Saga 350W
Samsung SH-S22F SATA Optical Drive
Dell E1910 IN LCD
Most probably I will be buying Config 1 but may opt for Config 2 if my final budget permits.
1. The config 1 Motherboard and monitor do not support DVI. Would it make much difference?
2. Should I invest in a separate Power Supply?
3. Will I be able to add a graphic card later to config 1?