90K+ Considering to buy Asus ap 201 for my new pc build

Vasp07

Vasp07

Beginner
I thinking of building a new pc and had a m-atx form factor in mind. My liquid cooler is 240 mm and gpu is rx 9700xt while psu is full atx rmx 850. Will it be manageable in this case or will I face problems?
 
Former AP201 user here, You will need to be a bit more specific on the exact Model on GPU & Motherboard

I used it with 180mm PSU and 340mm GPU with PSU positioned on the top most slot.
One concern I had was that the internal PSU cable has to be bent at significant angle for corsair RMx PSU which I was not comfortable with. Had bought a separate angled cable to solve this issue.
 
I have the same PSU and just finished a build in this case, ask questions or suggestions if you have any specific issues. I don't use an AIO but a 240mm should fit just fine from what I've seen and read.

its a great case aesthetically, good choice!
 
bfz said:
Former AP201 user here, You will need to be a bit more specific on the exact Model on GPU & Motherboard

I used it with 180mm PSU and 340mm GPU with PSU positioned on the top most slot.
One concern I had was that the internal PSU cable has to be bent at significant angle for corsair RMx PSU which I was not comfortable with. Had bought a separate angled cable to solve this issue.
Click to expand...

Msi B850 mortar, sapphire nitro +
 
bfz said:
You should be fine as the gpu size is less than 338mm. You might have to place the psu with fan on the inside to not stress the psu cable.
Click to expand...
Its the default configuration on AP201, which confused me initially as well. Also with the 850x, I think its not possible to do a PSU fan on the outside setup without using an L-shaped adapter for the power cable (something to do with the orientation of the power point on the PSU)
 
Top Bottom