PC Peripherals Fortron Source PSU Specifications

SunnyBoi

SunnyBoi

Branch Manager
Staff member
Patron
Alan was a bit tired of typing the specs everytime on every post. Therefore, created a thread to put all the psecs in one place.

FSP AX500-A 460W

Ratings :

+3.3V - 28A

+5.0V - 30A

+12V Line 1 - 15A

+12V Line 2 - 16A

-12V - 0.5A

+5VSB - 2A

Fan : 12CM Sleeve bearing

Form Factor : ATX 2.0



PFC : Yes, Passive

Connectors:

24pin Mobo connector - 1

HDD Molex Connectors - 4

FDD connector - 1

ATX12V - 1

SATA connector - 1

-----------------------------------------------------------------------

Fortron FSP550-60PLN 530W

Ratings :
+3.3V - 27A

+5.0V - 29A

+12V Line 1 - 18A

+12V Line 2 - 18A

-12V - 0.5A

+5VSB - 2A
Fan : 8CM Ball bearing
Form Factor : EPS 12V



PFC : Yes, Active
Connectors:

24pin Mobo connector - 1

HDD Molex Connectors - 5

FDD connector - 1

ATX12V - 1 (optional)

SATA connector - 2

EPS12V connector - 1

PCI-E Power connector - 1

Auxiliary Connector - 1
 
I am a bit confused , regarding the number of "HDD Molex Connectors"
AX500-A has just 4 Molex Connectors.

The FSP AX500-A Blue Storm
IS same as the AX500-A Grey one which we are getting.
But it has more number of HDD Molex connectors "8"
Check Image:- http://www.silentpcreview.com/files/images/BlueStorm/case_bottom.jpg
Source:- http://www.silentpcreview.com/article212-page1.html

I wanted to recomfirm this , even my old 160W PSU has 4HDD Molex connectors.
Are you sure that it has just 4Molex connectors.
 
Hi Quad Master,
AX500-A here is out standard OEM version without blue paint. and, the connector is as described by the thread, HDD Molex Connectors - 4; FDD connector - 1. And, the price is cheaper than Newegg.
 
FSP-Alan Lin said:
Hi Quad Master,
AX500-A here is out standard OEM version without blue paint. and, the connector is as described by the thread, HDD Molex Connectors - 4; FDD connector - 1. And, the price is cheaper than Newegg.
Click to expand...
Alan could you post a picture of both the psus to make it easier for everyone to exactly know what the psu looks like. Thanks a lot :)
 
But, I think electrical specification and DC output ratings should be more important and decisive in your desire to buy.
And the shap is nearly the same as you saw on FSP website, except the cable harness. the cable harness has to do with cost and customized requirement from the customer.

Chaos said:
Alan could you post a picture of both the psus to make it easier for everyone to exactly know what the psu looks like. Thanks a lot :)
Click to expand...
 
Reg 460W only
- Is the wire sleeved , wow thats what i also wanted to confirm.

- Are there more Molex connectors on the AX500-A , i mean more than 4 as sunny mentioned above.

- Also the molex connectors have a specific design for the blue storm which helps us to remo

Also Mumbai Guys is this Y Splitter Molex cable available here easily
to increase the number of molex connectors.
http://www.themodfathers.com/Articles/heatshrink/7.jpg
 
Quad Master said:
Is the wire sleeved , wow thats what i also wanted to confirm.

Are there more Molex connectors on the AX500-A , i mean more than 4 as sunny mentioned above.

Also Mumbai Guys is this Y Splitter Molex cable available here easily
to increase the number of molex connectors.
http://www.themodfathers.com/Articles/heatshrink/7.jpg
Click to expand...
Y-splitters are easily available at lamington. In fact my dealer doesnt even charge me for it :). However the best bet would be to get the sleeved AX500-A which has more molexes and sata connectors. Worth the extra 5$ I believe.
 
Back
Top