Review Grandstream GWN7003 Review

napstersquest

Valued Voice
Herald
Was looking for a solid wired router to load-balance my multiple WAN connections, and came across this unit: https://fgtechstore.com/product/grandstream-gwn7003/.
Thought hard about ER-X, Hex-S, Grandstream GWN7002 and this one before finally pulling the trigger.

Due to lack of reviews online and here, was a bit skeptical at first but after talking to few forum members, thought that will give fgtechstore a go.

They shipped using Shree Tirupati Courier, from Nehru Place, Delhi. Packing was adequate (I chose the free shipping option). Arrived in Pune 3 days after placing the order.

The router itself has very nice UI, loads of features, performs well so far. I am not a heavy user.

The physical ports are what made me go for this particular unit: 9 gigabit ports that can be configured as LAN/WAN, 2 SFP (2.5G) ports that can also be configured as LAN/WAN. I might someday ditch the ONUs and get SFP Sticks.

As I was planning to use existing 12V 2A Router UPS, power input was crucial for me but everywhere (datasheet, manual) it mentioned 24V 1A input. Found one youtuber who reviewed this unit, and while showing the ports he mentioned 12-24V as written near the DC In Jack. I can now confirm that it works with 12V 2A router UPS. The physical port is standard 5.5x2.1mm DC Barrel jack. Please note: even though the router supports POE Out on ports 1 and 2, I am not using it, so your mileage may vary with the 12V router UPS.
 
Could you share the system cpu temp? mine seems very high on gwn7002.
You are right. It seems quite high for idle.

1747223702898.png


I don't think it would matter though, as it is well below 125C.
1747223887325.png


Also a thing to note, mine sits in a network rack which inside a cupboard with 2x (filtered) intake and 2x exhaust 12V PC fans (Corsair). So very high ambient (should be close to 40C) temps.
also only first wan support ipv6 which is bad.
I noticed that only now. Also, ipv6 on primary WAN isn't working for me as well (shows status as connecting - not sure what configuration I messed up and if it worked with other routers either). But I am not a heavy user and it didn't bother me till now.
 
  • Like
Reactions: rocking
You are right. It seems quite high for idle.

View attachment 235475

I don't think it would matter though, as it is well below 125C.
View attachment 235476

Also a thing to note, mine sits in a network rack which inside a cupboard with 2x (filtered) intake and 2x exhaust 12V PC fans (Corsair). So very high ambient (should be close to 40C) temps.

I noticed that only now. Also, ipv6 on primary WAN isn't working for me as well (shows status as connecting - not sure what configuration I messed up and if it worked with other routers either). But I am not a heavy user and it didn't bother me till now.
yes it is sad few small things has been missed. otherwise it is really good. 2sfp port at this price range is not available. I tried opening it to replace the heatsink with copper one but it is hard. even with metal case it is high. mine is gwn7002, idle at around 70c when i use a mini usb fan.

you can see the report and can try replacing the heatsink if you are rich to afford second one. :D

 
Thought hard about ER-X, Hex-S, Grandstream GWN7002 and this one before finally pulling the trigger.
It looks well priced for the number of ports. Not sure about features. Is there any other reason to skip hex-s? I have a mikrotik hap. router and was planning to get another mikrotik device(without AP) when I need to expand. Spec wise this looks good but how does it compare to router os in terms of features ? If its on par, this looks more bang for the buck.
mine sits in a network rack which inside a cupboard with 2x (filtered) intake and 2x exhaust 12V PC fans (Corsair)
My mikrotik router is also 12-24V and is powered using a 12v 3A router ups. The router gets quite hot by itself. So, I keep them apart and in the open. Won't you have issues with your ups battery cells if its sitting in closed area with 40C ambient temp ?