GSkill PC8000 2GBHZ DDR2 1252MHz CL 4-4-4-5 Sandra 12K record broken by Shamino @ VRZ

Status
Not open for further replies.
Q

Quad Master

Herald
Guys Shamino does it again.

Rig
AMD AM2 FX62 bare core IHS Removed @ Watercooling by Modded Vostok Water-Kit on ASUS M32N nForce 590 SLI:



ASUS M32N VDDR2 pencil modded, 2.7v DDR2 =
25fk1.jpg


Pics

4a7ox.jpg

626MHz, Cas 4-4-4-5, DDR2 1252 MHz!!

Shamino said:
This pair of GSkill easily tears through 12,000 Sisoft Sandra Memory Bandwidth.... 12424! This should be one of the highest sandra memory scores around!
Click to expand...


Source:- http://forums.vr-zone.com/showthread.php?p=1903175#post1903175
Jaw dropping Stuff there by Shamino. :hap2:

I already see some people out here eyeing those ram sticks.
 
Not with Intel... when I saw 2T I assumed it was something to do with the AMD processor or nForce chipset.
 
2.7v volts... thats insane... but 2T...?? thats should decrease performance ?? I thought 1T was the one to give good performance..
 
Simply awesome...

Will be waiting for more benchmarks on that FX-62 cause that's one hot proccy to watch for.

Edit : Are those D9's ?
 
with intel platform its always 2T by default atleast on intel chipsets.

RD600 is suppose to change this picture.

with AMD its different. But guess DDR2 cant clock high with 1T.
 
Doesn't sound right... I don't believe Intel has ever had issues of running memory at 1T. In fact, I've run 3 DIMMs @ 1T on my P5GDC. Your last statement may hold true however, that high clocks are not possible at 1T.
 
Even i had heard something of the sort, that 1T will only be possible with RD600. But it hardly makes a difference in the real world anyway, only in benchies. Real world difference if any is in the range of 3-5% usually.
 
RiO said:
Doesn't sound right... I don't believe Intel has ever had issues of running memory at 1T. In fact, I've run 3 DIMMs @ 1T on my P5GDC. Your last statement may hold true however, that high clocks are not possible at 1T.
Click to expand...
using DDR2 or DDR. ( afaik that board can take both DDR and DDR2)
I am yet to see 1T default intel mobo for DDR2 memory.
 
DDR2 running at 1T, is only possible below 300 Mhz or DDR2-600.

Again, ATi is just hyping its RD600. A Bit too much :P.
 
One thing i know ... u can't run 4 modules in 1T with a athlon64 processor or better ... unless and until ur mobo explicitly supports it ... even then the performance gain would be negligible ...
 
Status
Not open for further replies.
Top Bottom