blackhorn
Disciple
So my system is as follows:
Ryzen 1600
Asus Tuf b450m
Hyperx 2666mhx DDR4 RAM
Inno 3d Gt1030
Samsung Nvme 980 500gb
Gigabyte Wifi Card
SFX450 Corsair
It had windows 11 on it, and one of the USB ports had been malfunctioning. I had been putting off the RMA, since it going to take some time and this is the primary PC my kid is using to attend his classes. One fine day as he was attending class and I was leaving work, a new update popped up on windows 11, I just put it on snooze to install it later. Apparently a short while after, we had a series of power cuts (4-5), and after that the PC began giving random BSOD's, attributing it to the possibility of power failure while updating. I reset the PC to stock, a clean install while retaining files. Didn't work. BSOD persisted. Attributing the latest update of windows 11 not supporting ryzen 1600, I reverted to a clean install of Windows 10, BSOD's are less but still persisting. I took out the rams, reinstalled them, the video card and the wifi card as well. Still no luck.
Have performed the following tests:
Memtest(no errors)
Chkdsk of all connected Hard drives(no errors)
The BSOD's I have got so far:
CRITICAL PROCESS DIED
SYSTEM THREAD EXCEPTION NOT HANDLED
and the latest I am getting repeatedly is
WHEA UNCORRECTABLE ERROR
It seems to be a hardware issue, but how to narrow down which one it is, I don't have a lot of spare hardware lying around. Which I can test against. If someone has encountered this problem or can give some direction to narrow down which part it is, would be very helpful. Thanks in advance.
Ryzen 1600
Asus Tuf b450m
Hyperx 2666mhx DDR4 RAM
Inno 3d Gt1030
Samsung Nvme 980 500gb
Gigabyte Wifi Card
SFX450 Corsair
It had windows 11 on it, and one of the USB ports had been malfunctioning. I had been putting off the RMA, since it going to take some time and this is the primary PC my kid is using to attend his classes. One fine day as he was attending class and I was leaving work, a new update popped up on windows 11, I just put it on snooze to install it later. Apparently a short while after, we had a series of power cuts (4-5), and after that the PC began giving random BSOD's, attributing it to the possibility of power failure while updating. I reset the PC to stock, a clean install while retaining files. Didn't work. BSOD persisted. Attributing the latest update of windows 11 not supporting ryzen 1600, I reverted to a clean install of Windows 10, BSOD's are less but still persisting. I took out the rams, reinstalled them, the video card and the wifi card as well. Still no luck.
Have performed the following tests:
Memtest(no errors)
Chkdsk of all connected Hard drives(no errors)
The BSOD's I have got so far:
CRITICAL PROCESS DIED
SYSTEM THREAD EXCEPTION NOT HANDLED
and the latest I am getting repeatedly is
WHEA UNCORRECTABLE ERROR
It seems to be a hardware issue, but how to narrow down which one it is, I don't have a lot of spare hardware lying around. Which I can test against. If someone has encountered this problem or can give some direction to narrow down which part it is, would be very helpful. Thanks in advance.