Laptops How to connect laptop to a PC

K

Kneo

Discoverer
I would be getting a IBM laptop from my office soon. I need to know what is the quickest (in terms of time i.e. less hassles) and the most efficient (in terms of copy speeds between the two boxes) way to connect the laptop to my Home PC.

I may need to sync the mails and maybe a work folder and copy some other data.
 
Kneo said:
I would be getting a IBM laptop from my office soon. I need to know what is the quickest (in terms of time i.e. less hassles) and the most efficient (in terms of copy speeds between the two boxes) way to connect the laptop to my Home PC.

I may need to sync the mails and maybe a work folder and copy some other data.
Click to expand...

The best way with the least hassles is to install a wireless card on the desktop (assuming it does not already have one). You can then copy files to and from the desktop to the laptop.

The cheapest way is to buy a network cable and connect the two pcs. I believe it is called a 'crossover cable' (but I could be mistaken). This looks like a regular ethernet cable, but the wires are connected differently. You can make it yourself or get it made. Total cost approx Rs. 100.

Hope this helped.
 
Get a ethernet cable. Put in manual ip addresses on both the laptop and the pc, make sure they'r on the same work group and your set.

to share data, share a partition in both the computers.
 
Syncing mails ? How are you going to do it ? By copying Outlook mailbox ? If thats the case, simply get a USB key. Otherwise a crossover cable.
 
Ank1t said:
Get a ethernet cable. Put in manual ip addresses on both the laptop and the pc, make sure they'r on the same work group and your set.

to share data, share a partition in both the computers.
Click to expand...
Generall this works, but not always, and for some reason its a hassle with notebooks, and make sure u can roll back in case u decide to install norton.
 
i think 100 is too much for a crossover cable...i paid 40 bux for a cat 6 crossover...get cat 6 ...better speeds i suppose provided your ports support
 
^ no point as your HDDs will be the bottleneck ;) And you will also have to have gigabyte ethernet ports on both the computers.

You dont really NEED a crossover cable these days.. I set up a lan with normal CAT 5 ethernet cables.
 
Nimit said:
i think 100 is too much for a crossover cable...i paid 40 bux for a cat 6 crossover...get cat 6 ...better speeds i suppose provided your ports support
Click to expand...
Where do you get good quality crimped cables - especially with molded ends ?
 
Back
Top