How to fit a acrylic sheet in the CABBY ?
- Thread starter devjadeja
- Start date
- Status
it comes pre fixed on the side panel.
for example Zebronics peace/antibiotic models.
Surly you can do it urself too.
take the side panel out & take it to any lathe machine to cut out the amount you want &then drill holes in the metal sheet & also the acrylic sheet then mount the screws.
for example Zebronics peace/antibiotic models.
Surly you can do it urself too.
take the side panel out & take it to any lathe machine to cut out the amount you want &then drill holes in the metal sheet & also the acrylic sheet then mount the screws.
.Check out a nice guide on how to fit an Acrylic Sheet in the Cabby here:
Plexiglass Case Window Mod :hap2:
Plexiglass Case Window Mod :hap2:
spynic said:
super_saiyan said:^but wont be strong i presume....
Yep, two way stickers aren't strong enough to hold heavy objects. I have seen plastic banners (in my office) fall off after some days. But they were held by smaller strips of 2-way sticker... However, if we apply a long strip of it to each edge of the acrylic sheet, I think it will hold it. But why take risk? Just screw it
or superglue it!!! 
hyeah:sauron said:
Thanks, I also liked the PSU Sleeving Guide on that site.
Now I have a desperate feeling to do a clean cable mgmt in my Cabby :frusty:
I'll get my hands on the sleeves and heatshrink from somewhere!!! :!
hey guys thanks a lots
what i m doing is getting a Acrylic or plexi glass sheet of about 0.3 mm which is totally bendable right. got the bending of just like cabby side panel sheet so tht one fix the screws as it is at the back of cabby
got couple of those hardisk-fiting-into-cabby screws of about 1.1 inch.
and now will screw the plexi glass on the other side to the hardisk and dvd rom/w drive ones srew holes altogether
got the sheet staighten at roller press and bending done.
exps. rs 350 total so far
lets see tomoro
what i m doing is getting a Acrylic or plexi glass sheet of about 0.3 mm which is totally bendable right. got the bending of just like cabby side panel sheet so tht one fix the screws as it is at the back of cabby
got couple of those hardisk-fiting-into-cabby screws of about 1.1 inch.
and now will screw the plexi glass on the other side to the hardisk and dvd rom/w drive ones srew holes altogether
got the sheet staighten at roller press and bending done.
exps. rs 350 total so far
lets see tomoro
adhirk said:Yep, two way stickers aren't strong enough to hold heavy objects. I have seen plastic banners (in my office) fall off after some days. But they were held by smaller strips of 2-way sticker... However, if we apply a long strip of it to each edge of the acrylic sheet, I think it will hold it. But why take risk? Just screw it
depends on d sticker
- Status