IC : Electronic Project Kits, components, Tools, Instruments

  • Notice: Market Section Posting Privileges

    Dear Guest,

    We appreciate your interest in participating in the Marketplace. To maintain a safe and reliable trading environment, posting privileges are granted only to users who meet the following criteria:

    • Minimum 25 forum posts in technical sections
    • Account age of at least 30 days

    Alternatively, you can gain accelerated access by upgrading to Enclave Plus Membership, which includes additional perks and privileges.

    If you have any questions or wish to learn more about becoming an Enclave Plus member, please feel free to reach out to us using the 'contact us' form in the footer..

Status
Not open for further replies.
A

Amarbir

Explorer
Feedback: +251 / =1 / -2
Mates ,

i was interested in getting your feedback on this .I have been a electronic freak since childhood .I have Most of the electronic Instruments That i use for my repairs with Me .Was interested To Know that Would you People Out Here Have Any Interest In

1 :soldering And Desoldering Instruments

  • Soldering Irons ,Soldering stations ,Desoldering Tools And stations ,Hot Air stations ,IR Rework stations
2 :Test and Measurement Projects

  • Multimeters ,Clamp Meters ,Other Meters ,EPROM/MCU Programmers ,Programming Adapters Etc
3 :Electronic Projects And Training Kits

  • All TYpe Of Projects Kits and Training Kits Like Atmel ,PIC Etc Development Board ,FPGA/CPLD Kits Etc
4 :Electronic Books

  • Well some Kinda Repair Books In english And Hindi
5 :Electronic Components

I Plan to start Some Dealer Order and Group Orders On these Items Too
 
amarbir, if you could come up with a kit/assembled LIRC recievers, I'm sure there would be a lot of people wanting to buy one. I know i would :)

then the exotic caps and op amps, and other components :)
 
greenhorn said:
amarbir, if you could come up with a kit/assembled LIRC recievers, I'm sure there would be a lot of people wanting to buy one. I know i would :)

then the exotic caps and op amps, and other components :)
Click to expand...

Hi ,

What is a LIRC Recievers
 
^^hey amarbir..din know i could get atmel kits from you.

do u stock the items or will it be ordered from distri's ? .. i might need a Atmel Butterfly kit for a small DIY project..
 
ComradE_BeaN said:
^^hey amarbir..din know i could get atmel kits from you.

do u stock the items or will it be ordered from distri's ? .. i might need a Atmel Butterfly kit for a small DIY project..
Click to expand...

Bean ,

I Do Much More Then selling compuuuuuuuuuuuterrrrrrrrrrrsssss .Getting To The Question ,What MCU are You Working At And Also What Project you Have in Mind Might Be i Could source A better kit for you
 
I'm always on. I'll be asking for a Goot or two from you. I already have a rework station but ended up not using it at all. It's not useful for building kits, better for SMD repair.

I'll also need a 'scope at some point, though I'm undecided between a PC and standalone scope. I fire up my iron almost every second day, FWIW. Most of my projects come in from abroad, and almost all are in the field of audio. My next project, coming December: The Buffalo DAC

I could really use someone who can do custom metal, glass and woodwork, price no object. I have a tough time putting things together and eventually have to resort to mounting my amps and DACs in the open.
 
sangram said:
I'm always on. I'll be asking for a Goot or two from you. I already have a rework station but ended up not using it at all. It's not useful for building kits, better for SMD repair.

I'll also need a 'scope at some point, though I'm undecided between a PC and standalone scope. I fire up my iron almost every second day, FWIW. Most of my projects come in from abroad, and almost all are in the field of audio. My next project, coming December: The Buffalo DAC

I could really use someone who can do custom metal, glass and woodwork, price no object. I have a tough time putting things together and eventually have to resort to mounting my amps and DACs in the open.
Click to expand...

Sangram ,

I Have Two Rooms Of Ths Material At Home And I am Not Getting The Time To Put It Online .I Will eventually .Secondly What Rework station you Hav Both Goot And Hakko Are Great Irons Even the Basic Once .
 
How to build an IR receiver

its a simple serial port IR reciever. it can be used with any remote control to control software like winamp etc ( lots of lirc plugs available for windows/linux)

edit: those guys seem to have done it without using a PCB
 
greenhorn said:
How to build an IR receiver

its a simple serial port IR reciever. it can be used with any remote control to control software like winamp etc ( lots of lirc plugs available for windows/linux)

edit: those guys seem to have done it without using a PCB
Click to expand...

Acha ,

I Got This ,Well I Am Into MCU Related Stuff But anyways This Project Will Be Fun To .Any Links Guys .
 
WingZero said:
good caps and opamps please...amarbir:D.
Click to expand...

Hi ,

I Have Great Caps Collections Cos i Use Them In Motherboards .Please Tell Me What All You Requires .

Caps :

Usage ,Capacitance and Tolerance

Op Amps

anything You Have in Mnd
 
Hi, I am an audiophile and adicted to music. Was looking arround to build 4feet by 6feet LED Graphic equilizer(nothing fancy mono old school visualization). Can u build the circuit or arrange a DIY. was looking for these for more than a year.
 
sangram said:
I could really use someone who can do custom metal, glass and woodwork, price no object. I have a tough time putting things together and eventually have to resort to mounting my amps and DACs in the open.
Click to expand...

what kinda metal work u looking at? enclosures?
 
Yup. Enclosures, cabinets, racks, stands, isolators, that sort of stuff.

@Amarbir: I use (or rather don't use) a unbranded hot-air station. I gave up as I figured you need the right tools and solder to work with it, and went back to a cheap little micro station for SMD work. It does fine for that task, and the tip temperature is too low to damage the components. It basically means I need two irons as most of the work I do is a mix of TH and SMD. For TH and almost all my other stuff I use a Soldron, which works fine but the spade tip means it's a tad tough to get into tight spaces, plus it's showing battle scars.

Also I think the request for caps is for audio-grade caps/opamps. The low-ESR types you use in power sections of motherboards may work well, but those values are usually too large. I have to import mine every time, though I wised up quickly and ordered a bulk quantity. I'm all stocked up for a couple of years at least.
 
Status
Not open for further replies.
Top Bottom