PC Peripherals I'm getting the DFI NF4 Ultra-D!!!!!!!!!

Generally this is how the different version perform-

510 -1,2,3
1 is common for both UTT/TCCD
2 is meant for UTT in Yellow Slots
3 is meant for TCCD in Prange slots.

As far as my experience goes, i got best results with 510-1,looove that BIOS.
 
@Darky

Did u try the 414's
those rox for sme reason :ohyeah:

@Masky
Yup Orange slots for ur TCC

Rockyme2002 posted 5.67 minutes later:

Oh nd BTw

You have it a little wrong. In general:
-1 is for TCCD
-2 is for UTT/BH/CH
-3 is for both

:cool2:

-1 uses 3.26 ram table
-2 uses 3.16 ram table
-3 uses 3.10 ram table
That is correct from a msnm conversation with Oskar.

Ok a couple of other points you might want to know and consider.

3/10 ram table limits you to 'two' stick dual channel to Orange slots still.

Since the 3/16/05 bios sticks could go into Yellow or Orange slots and NOT have warning to place sticks in Orange slots. This means bios with ram tables 3/16 and 3/26 can have two stick dual channel in either Yellow or Orange slots.

Now knowing that you should be able to take advantage of this feature for "however much" you find it worth.
Yellow slots 1 and 3 are supposed better suited for HI voltage and therefore UTT/BH-5 types of memory.
Orange slots 2 and 4 are supposed better suited for normal lower voltages and therefore TCCD/TCCC/TCC5 types of memory.
Click to expand...

nd yup i knw i suggested Masky to use -2, but thts bcuz ppl r getting good results wit tht on the rev2 , slightly higher increase in mhzz :)

BUt its upto u finally ;)
 
This DFI Mobo is so complicated for me to understand all its OCing.
Well i wud have gone half mad solving all its mysteries.

Well hope the A8N-E that i will be getting doest have something complicated like this.
 
Rockyme2002 said:
@Darky

Did u try the 414's
those rox for sme reason :ohyeah:

@Masky
Yup Orange slots for ur TCC

Rockyme2002 posted 5.67 minutes later:

Oh nd BTw

You have it a little wrong. In general:
-1 is for TCCD
-2 is for UTT/BH/CH
-3 is for both

:cool2:

nd yup i knw i suggested Masky to use -2, but thts bcuz ppl r getting good results wit tht on the rev2 , slightly higher increase in mhzz :)

BUt its upto u finally ;)
Click to expand...
Oops :P

i posted this by mistake,thanks for correcting me rocky... :hap2:
 
AM Afraid to break this news to u guys, but Darklord has passed to the Darkest Side :ohyeah:

1st Sunny's tower12(bending mobo) nd now for Masky's Bios :tongue: :cool2:
Looks like OC'ing has taken its toll on Darky :ohyeah:

j/k Darky :cool2:
No offense meant :)
 
Rockyme2002 said:
AM Afraid to break this news to u guys, but Darklord has passed to the Darkest Side :ohyeah:
1st Sunny's tower12(bending mobo) nd now for Masky's Bios :tongue: :cool2:
Click to expand...

lol.. looks like i need to do my homework myself b4 i try on the DFI :P

TheMask posted 9.18 minutes later:
Rockyme2002 said:
AM Afraid to break this news to u guys, but Darklord has passed to the Darkest Side :ohyeah:
1st Sunny's tower12(bending mobo) nd now for Masky's Bios :tongue: :cool2:
Click to expand...

lol.. looks like i need to do my homework myself b4 i try on the DFI :P
one quick question though.. where do i download the BIOS from? DFI-Street.com?
 
Guys can someone give me mnemonics address? I need to enquire about rest of the config. Mainly I need good loan options. Only then can i ask my friend to get the dfi.
 
Back
Top