Issue with DDwrt

Status
Not open for further replies.
shadow747

shadow747

Inactive
Forerunner
I have buffalo wzr-hp-g300nh with stock firmware but when i tried ddwrt based firmware router loses internet connectivity. pc and router are pinging but no connectivity beyond router.In windows it is mentioning dns not available.so due to this back on factory firmware.Any solution to this
<
 
so after checking many places problem solved.changed ip address into 192.168.11.1 from 192.168.1.1.wan and lan on same subnet was making issue i guess.

now in optware but wifi is showing 0 % signal and 0 bit rate but lan is working ok. help needed for setting up wifi
<
 
flash went correctly. went to 10.03.1-rc4 and found out that wifi works good in 10.03.1-rc4 but not in 10.03.1-rc6. no signal in 10.03.1-rc6 version as this has n speed supported too.

so after moving back and forth.finally wifi worked.will check if openwrt 10.03.1-rc6 version is stable enough
 
shadow747 said:
flash went correctly. went to 10.03.1-rc4 and found out that wifi works good in 10.03.1-rc4 but not in 10.03.1-rc6. no signal in 10.03.1-rc6 version as this has n speed supported too.

so after moving back and forth.finally wifi worked.will check if openwrt 10.03.1-rc6 version is stable enough
Click to expand...

10.03.1 final is already there, any reason to use rc6 ? I have been running the 10.03.1 final without any issues for sometime now.
 
rc6 working now. will move onto [font=arial, sans-serif]10.03.1 final after sometime as rc6 has limited n speed support.[/font]
 
Status
Not open for further replies.
Top Bottom