Large Capacity HDD's (6TB-20TB)
- Thread starter aasimenator
- Start date
-
Notice: Market Section Posting Privileges
Dear Guest,
We appreciate your interest in participating in the Market section. To maintain a safe and reliable trading environment, posting privileges are granted only to users who meet the following criteria:
- Minimum 25 forum posts in technical sections
- Account age of at least 30 days
Alternatively, you can gain accelerated access by upgrading to Enclave Plus Membership, which includes additional perks and privileges.
Thank you for your understanding and cooperation. If you have any questions or wish to learn more about becoming a Patron, please feel free to reach out to our support team.
Sincerely,
The TechEnclave Team
eTernity2021
Forerunner
Ok I will try to some in the next batch
I am not getting good pricing on 8TB so i am really not getting it as the pricing i am getting is close to 11/12K for 8TB and at that price it makes sense to pay a few thousands more and get the 10TB.
Last edited:
Seagate enterprise 10TB SATA HDD
Price: 13000/-
Warranty: 1-YEAR
Shipping: Free
Qty available: 10
Price: 13000/-
Warranty: 1-YEAR
Shipping: Free
Qty available: 10
prime
Herald
Hi everyone.Paid for one WD UltraStar DC HC510 10TB.
Thanks @aasimenator for patiently answering my endless queries.
I received WD UltraStar DC HC510 10TB HDD today. Thanks to @aasimenator
Initially, it was not being detected by SATA power connector but was detected with MOLEX to SATA power connector (i3-12100 + ASUS Prime H610M-E D4).
I have put it for surface scan. It is making a noise after every 5 seconds (fix interval) since last 50 minutes (Voice 002.zip). Is it normal?
HDtune shows some warning "Interface CRD error count" (Please see the screenshot). What is it?
Is everything normal? Sorry, I have not been using mechanical HDDs in my PC since last 7-8 years so no experience with these HDDs.
Attachments
CRC errors happen due to bad sata cable, try changing the cable and see if the count increases.
Hey,
I sent you a screenshot of the smart data as well yes?
Compare it with yours, mine doesn’t have it and it is not something that happens when the drive is offline.
That 2 looks like its happening after you puggled it in, so as @rajch2002 mentioned use a proper sata data cable.
Some noise is common these drives do make noise, but are still silent than Seagate drives. Remember Enterprise drives are not built for quite operations, as desktop drives. They dont care about silence or vibrations all they care about is speed and reliability. You can check its datasheet it will tell you the same
prime
Herald
Thanks. Hard Disk Sentinel is showing same parameters as yours at my place also. Just curious about HDTune Warning. Will change cable and see once error scanning is complete.
Thanks. Will change cable and see once error scanning is complete.
Attachments
SMART Data of these drives, atleast the ones i have with me, seems to have been used a good amount, reducing price of this drive to Rs. 10500/- without warranty. or 11500 with 1 Year warranty.
prime
Herald
I changed 4 SATA cables and 2 SATA power to Molex power connectors but the result was same. Later I realized that "The Error Count of 2" was there in the screenshot sent by the seller but I didn't notice because "Hard Disk Sentinel" doesn't highlight it whereas "HD Tune Pro" highlighted it and I noticed.
Left positive feedback anyway.
Attachments
Last edited:
That's because CRC error count is almost always due to bad sata cable & it doesn't affect hdd health in anyway & only affect data transfers resulting in data corruption so many hdd tools don't highlight this error. Once a crc error is recognized & recorded in SMART stats it never goes away so that 2 error was likely due to usage of a bad sata cable sometimes in the past & it will stay here permanently until entire SMART data is reset.
@aasimenator, I have completed testing the 14tb HC530.
- SMART values matched the screenshot you sent me prior to shipping.
- Completed short and extended SMART self tests without issue
- Completed Unraid pre-clear without issue
- Loaded up approx 80% with data. Speeds are as expected.
Hello everyone,
The package came in early
They are still under WD Warranty for the next 2 years (expiring in 2026) but since these are not Indian drives but imported, and I don't know the region from where they are imported, You can consider them out of warranty (unless you know a way to get warranty from WD then it would be your gain)
Model: Western Digital UltraStar DC HC530
Capacity: 14TB
Cache: 512MB
Speed: up to 255 MB/s
Drive Type: CMR
Health: 100%
Power-on-Time: 1000+ DAYS
Condition: GOOD
Manufacturing Date: ~ 2020
Warranty: 7 Days Testing & DOA Warranty
Qty Available: 20
Price: Rs. 15000/- per drive
View attachment 195725View attachment 195726
View attachment 195728View attachment 195729
DISCOUNTS!!!
Get 14TB HDD @ 12500/- for the next 72 Hours.
I will take one. Is it compatible with normal x570 motherboard without any power cable modifications needed ? Read somewhere that some WD disks require some modifications done to the sata power plug which I am not keen on !
Thanks
Don't modify anything. Just buy a molex to sata power cable and use that if required.
badwhitevision
Forerunner
Never had such issue. Didn't found any problem. Using since last 3+ yrs.
Thanks. This is something I'd rather not do. Which models are affected by this sata power issue ?
I googled a bit and this model ( pic shown by seller ) doesn't need molex to sata adapter because 2nd last character is L. If 2nd last char is 0 then molex to sata is needed.
https://community.wd.com/t/ultrastar-dc-hc530/282698/2
Last edited:
I have not heard of any sort of an issue with this drive, the HC510 does have that problem but not had any issues with this one, they all work well on my 12th gen i5 system and not had any issues with any of these drives nor needed to use Molex connectors.
Another way to check for a specific drive is to check the warranty coverage for the serial number here: https://support-en.wd.com/app/warrantystatusweb
For one of the drives posted by @aasimenator this is what shows up:
P3_PWDIS_Not support => means the power disable feature (which causes the hdd to not be detected with some older PSUs/backplanes) is not present.
More details are here from WD: https://documents.westerndigital.co...h-brief-western-digital-power-disable-pin.pdf