dreamCatcher
Contributor
Just wanted to share this here after being on the Logitech forums for years, I have observed that the members there have found the following hidden secret settings in their Z5500 speakers. I have tried all of these and they work just as described.
NOTE: You are trying these settings at your own risk, I am no where responsible if something is screwed up. This is just a compilation of things found on the internet and I am not the one who has discovered it. Trying these will not void your warranty but may reset your settings.
1. Second Skin: With the speakers off (red light on), press and hold Input, Effect, Settings and Mute all at once, until the screen lights and says "Second Skin On". This will change the colour of the power LED to violet when in stand-by mode, and change the graphics of the volume bars. Do it again to turn it off.
2. Diagnostics Mode: With the speakers off (red light on), press and hold Input and Effect until the screen lights and says "Diagnostic Mode On". This will cause the screen to provide stream information when changing sources. Do it again to turn it off.
3. Volume+ Mode: While adjusting the volume, press and hold the Mute button and turn the knob right. It will add "Volume+1".."+11" to your volume level. This adds +n increment to the volume or sound output.
Also, try this in "Boost" mode, and it will go up to Boost 22. You must hold the Mute button again while turning it down to clear the increase.
Post below what you feel, if you tried it.
NOTE: You are trying these settings at your own risk, I am no where responsible if something is screwed up. This is just a compilation of things found on the internet and I am not the one who has discovered it. Trying these will not void your warranty but may reset your settings.
1. Second Skin: With the speakers off (red light on), press and hold Input, Effect, Settings and Mute all at once, until the screen lights and says "Second Skin On". This will change the colour of the power LED to violet when in stand-by mode, and change the graphics of the volume bars. Do it again to turn it off.
2. Diagnostics Mode: With the speakers off (red light on), press and hold Input and Effect until the screen lights and says "Diagnostic Mode On". This will cause the screen to provide stream information when changing sources. Do it again to turn it off.
3. Volume+ Mode: While adjusting the volume, press and hold the Mute button and turn the knob right. It will add "Volume+1".."+11" to your volume level. This adds +n increment to the volume or sound output.
Also, try this in "Boost" mode, and it will go up to Boost 22. You must hold the Mute button again while turning it down to clear the increase.
Post below what you feel, if you tried it.
hyeah::bleh:
