CPU/Mobo Motherboard for Pentium 2.4Ghz 478

Status
Not open for further replies.
Rahul

Rahul

Galvanizer
one of mine fren was having zenith intel PC ..... his mobo is gone ..... he wants a new mobo with good inbuilt graphics..... wat u guys suggest as i am not much into intels ...... his motherboard was D845GVAD2 ..... and he is having a 2.4Ghz proccy dunno know which core.... ......
 
The 845 will probably choke a 2.4 "C".A 2.4 "B" will do fine though.I think an 865 based mobo would be a better bet.
 
he can go for around 6k without problem .....but thing is he is not getting a graphics card so that sud have a good inbuilt solution ...... i was thinking about the boards having 9200 IGP from ATi ....... only ASUS and Intel are available here ..... so wat u say guys ...
 
as i said he is getting the mobo from home ...... i mean his parents sending it to him but they are not ready for a graphics card ...... i dunno y
 
games , exams...lol...

in tht case get a asus P4P800-VM...Asus 865G chipset...
 
Well if a good IGP is needed, go for the Gigabyte GA-8TRS350MT. It has an RS350 northbridge and should perform quite decently. If thats not available, P4R800-Deluxe or whatever from asus is a good deal too.
 
thanks guys i have given him the name of the same mobo's u guys are telling that is P4R800-Deluxe and P4P800-VM ..... lets see wat he gets ..... anyways is intel extreme graphics 2 is better than 9200 IGP ....
 
SunMysore said:
in tht case get a asus P4P800-VM...Asus 865G chipset...
Click to expand...

When friends ask me suggestions for a low budget Intel setup I always suggest this MoBo and so far 3 of my friends systems have this board installed for over one year and none of them have given any problems..... SO FAR !!
 
I guess that board is ok, I dont know the indian market very well but intel boards (although no ocing) are rocksolid and dont droop as much as ASUS boards do. I think he should be fine with that tho
 
no Ati chipset ASUS available with rashi :( ...... so i think he has to buy some crap intel ....
 
wtf O_O intel chipsets ATM are much better than ATi's.....especially for intel procs.

If he wants the bestchipset for his 478 chip that would be the 875P
 
kev182 said:
If he wants the bestchipset for his 478 chip that would be the 875P
Click to expand...

I have been using an ASUS P4C800ED board which is based on the 875P chipset for over a year and it is ROCK SOLID. Never seen a lockup or BSOD. It overclocks my 2.4C CPU quite nicely.
 
yea, the p4c800 e-dlx is one of the best 478 boards, up there with the Abit IC7-G and DFI 875B

Although that board has one of the worst vcore droops under load. Which is why 90% of the ocers using that board to a droop mod.
 
^^ Read carefully... he's looking for a chipset with onboard video. Canterwood doesnt have onboard video.
 
Status
Not open for further replies.
Top Bottom