Need help with overclocking

[Amol]

My setup is in my sig,

My o/c is limited to a 232 * 9 or 235 * 8.5

NO matter what i try, i.e increase the RAM voltage from 2.5 to 2.7 or 2.8 (max supported by my mobo ), the pc fails to POST.

Is there any other way to push the FSB.

I loosened the timings from (2.5-4-4-8) i.e the SPD timings to (3-4-4-10) but it still doesnt let me overclock above 235. Any specific reasons why ?

Is there any other way to o/c the RAM ?

 

[Quad Master]

Firstly dont use .5 Multipliers.

Whats ur CPU Temp at max 232x9
Also do you have Dual Channel Ram or Single 512MB Module[That wont affect but still wanted to know]

Hope that ur RAM has hit its limit , use DDR333 Divider to OC ur CPU.
Also go thru various OCing posts here on TE

 

[Nikhil]

Go through the various posts here on TE. And also, you need to increase the voltage to your CPU (also called Vcore voltage) to increase the OC of your CPU.

Nikhil posted 4.07 minutes later:

http://www.techenclave.com/forums/showthread.php?p=40487#post40487

Check this out.... should be helpful to you.......

 

[Darklord]

Current lot of 754 chips dont OC too well.
Mine also didnt do quite well,thats why i sold it off quickly