Painting inside of my Cabby - need suggestions !

Status
Not open for further replies.
mihirpradhan204 said:
@Sudarshan SMD

Do I need all the grits you mentioned or only any one of them??

If all, then in which sequence are the sandpapers to be used??
Click to expand...

Get grit papers meant for Metals. I have tried Carpenters Grit paper, it don't work well on metal, Sand particles from sandpaper comes off.

No need to get all sandpapers (i mean diffrent grit), you would be OK with any one 100/200/400.

I have bought 100,120,200,400. they are cheap and i am sure i will find it's use somewhere else. They cost 10Rs/Paper, also size of sandpaper is pretty large.

This make clear you don't need any sequence of use of sandpaper. If you are going to try all of em then 100->200->400.

For what did ya got that Spray Can(I mean cost of the Spray Can)? dammn........I need one, but it's not available locally:@

Also, give me same info about masking tape as Spray Can.
 
^^I got Grit 100 and Grit 320 Sandpaper for metals..
Personally, I liked the Grit 100 because it was doing the job faster than the Grit 320.

I got the spray can for painting the cabinet.

Aahhhh... and the tape was just *. I asked the vendor 3-4 times whether that was a masking tape and his answer was YES. But when I applied it to the exterior of the cabby (I only wanted to paint the inside), the glue remained even after I removed the tapes... :@

Damn, now I'll have to paint the exterior of the cabby as well... :(
 
^^ ok, atleast thats can come off...I tried making a top blow hole in my cabby (CM Elite 330) and ended up with an ashtray on top of my cabby :)

Plus the paints all gone...gonna try out sandpaper and paint
 
Status
Not open for further replies.
Top Bottom