chasni_chasni
Explorer
Hi Everyone:
This is my build:
i7 4790k
ASUS MAXIMUS VII HERO
MSI GTX 560 Ti Twin Frozer
SeaSonic X Series X-850 (80 Plus Gold)
Corsair H100i
My GTX 560Ti developed an overheating problem so I submitted it for RMA. I have been using the on-board Graphics till now. I received my repaired card which was tested at the service center in front of my eyes and it was working fine.
I installed the GPU in my system but forgot to connect the power cables to the card. I turned on the system. Fans and leds flash for half second and nothing happened. Then I realized that I forgot to plug the power cable to the GPU. I connected the power cable and tried again but the same thing happened again, system fans and leds flashed for half second
I have tried to boot the system with bare minimum and it works fine as long as I don't install the card. I also tried both the PCI-e slots but system doesn't turn on if the GPU is installed in any of the two pci-e slots. However, If remove the GPU, the system boots normally and everything is fine.
I took back the GPU the service center and it is working fine.
I am not sure which one is the culprit (PSU or PCI-e slot)?
Please help
This is my build:
i7 4790k
ASUS MAXIMUS VII HERO
MSI GTX 560 Ti Twin Frozer
SeaSonic X Series X-850 (80 Plus Gold)
Corsair H100i
My GTX 560Ti developed an overheating problem so I submitted it for RMA. I have been using the on-board Graphics till now. I received my repaired card which was tested at the service center in front of my eyes and it was working fine.
I installed the GPU in my system but forgot to connect the power cables to the card. I turned on the system. Fans and leds flash for half second and nothing happened. Then I realized that I forgot to plug the power cable to the GPU. I connected the power cable and tried again but the same thing happened again, system fans and leds flashed for half second
I have tried to boot the system with bare minimum and it works fine as long as I don't install the card. I also tried both the PCI-e slots but system doesn't turn on if the GPU is installed in any of the two pci-e slots. However, If remove the GPU, the system boots normally and everything is fine.
I took back the GPU the service center and it is working fine.
I am not sure which one is the culprit (PSU or PCI-e slot)?
Please help