Post your Rigs !

My rig,
P4 2.8E
Intel 865GBF
80GB SATA HDD
40GB 7200HDD
EVGA 6800GT with NV5 silencer
Sony DVD-R
2*Vantec HDD cooler
Antec Triled Fan and Internal LED tube
4 LED case fans
X-connect Modular PSU
Thermaltake Xaser III Full Tower
Creative 2.1 speeakrs
Samsung 17" 763DFX
Vantec Illuminated mousepad
Elumnix illuminated keyboard
 
hey daviescool good to see you here.
I was just wondering, hows that Evga holding up with NV5?
Man these evga cards are sick, overclocks better than many gainward GS.
I know the card i sent you is good overclocker. But hows it doing after NV5?
The one I have is going over 425 without any bios mod.
 
My Rig
Athlon 64 3200
Asus A8V Deluxe
1GB Trascend DDR 400 512x2
Samsung 19"Flat Monitor
XFX Geforce 6800GT
1XSony DVD ROM, 1X Samsung CD RW
Generic Keyboard, black
Logitech Optical Mouse
Creative FPS 1500
1xseagate 160GB SATA
1xseagate 160GB IDE
1xSeagate 80GB IDE
Powersafe 400Watts PSU
 
Thanks guys

@bottle I have been waiting for the rig from like December but plans got delayed due to some unavoidable reasones. I got the parts couple of days back. Right now i am just trying the rig out. Would stress test it coming tuesday cause thats my holiday. Would post few benches then. I am plaiing to buy a Zalman cooler and an VGA silencer but than again i might just not do it as the nose levels are low inside the rig and its fast enough as of now so dont really need to overclock.

@blade... I wonder why arn't you surpised ;)...
 
Last edited by a moderator:
Switch said:
My Rig
Athlon 64 3200
Asus A8V Deluxe
1GB Trascend DDR 400 512x2
Samsung 19"Flat Monitor
XFX Geforce 6800GT
1XSony DVD ROM, 1X Samsung CD RW
Generic Keyboard, black
Logitech Optical Mouse
Creative FPS 1500
1xseagate 160GB SATA
1xseagate 160GB IDE
1xSeagate 80GB IDE
Powersafe 400Watts PSU
Click to expand...

Me drools and congratulates switch, reads specs again and faints, regains consciuosness starts drololing again and explodes all over the place :p
 
hey all,
Thanks for the comments. Hey Funky, nice to cu 2. The card was runnin stable 425/1140 though 420/1120 is I think right for this card. Temps are always hovering between 54-61c, 61 on load with the NV5. sure is a good oc'r
 
Cool rig there Switch.

One suggestion though.DO NOT use Powersafe 400 Watt PSU in your current setup.Get Antec.Even though Powersafe is good,it is insufficient for your setup.
 
Actaully the 160 IDE would be giving way for my second PC and i would also be removing one of the optical drives... So i think it wouldnt matter that much... I dont feel any problems with Powersafe as of now(Also i am not thinking about Overclocking this) but i would keep an eye. Need to buy some other stuff before the PSU.
 
My Rig
Pentium 4 2.4 Ghz
Intel 865GBF Motherboard
256x2 MB RAM 266 MHZ (HYNIX)
LG 17" MONITOR
ASUS GEFORCE 4 440MX 128 MB
LG COMBO DRIVE DVD-R/CD-RW
LOGITECH WIRELESS KEYBOARD AND MOUSE
1XSEAGATE 40 GB HDD 7200 RPM
UNKNOWN BRAND PSU 350W.

My Config isnt one that i boast about but its a nice computer that manages about 3-4 fps in DOOM 3 at ultra quality ;-) I dont know how but it does.....

I m going to upgrade to XFX Geforce 6600GT 128MB GDDR3 EDITION the next week and also buy TRANSCEND RAM 1024 MB RAM 400 MHZ WITH A 160 GB HDD.

I would be a happier member then.
 
Heres mine:
Tbred-B@9.5X200=1.9GHz(I guess its a 2500+)
A7N8X-X,
2X256mb KVR PC2700+256MB hynix d43,all at 400mhz 2.5-3-3-11,
XFX 5700LE 256MB@425/505(my gf3 fried a lil too soon or I would have waited for a GF6 :mad: ),
Philips 17" monitor(two of 'em actually coz its under replacement.... :p )
Creative SBS370
A "colorsit" PSU rated 400W though I suspect its closer to 250W :rofl:
(a finex "350w" rebooted my system ,this doesnt-go figure,most psus in India are not even capable of a 60% load I guess)
Samsung SP0802N,80GB,7.2k rpm
LG8481B@8520B CD-RW
Lite-ON 167T DVD-ROM
Logitech Keyboard+Frontech optical mouse
And Epson C43sx+Benq 3400u scanner
 
well here's mine...

Pentium4 3ghz
512mb ram(400mhz)
Intel 865gbf mobo
ATI radeon 9600
LG 17" flatron
Micorosoft basic scroll optical mouse
TVS gold keyboard
Samsung CD writer
Samsung DVD rom
1*80gb hdd+1*160gb hdd(seagate)
PerX 350w PSU
IBOX cabinet
 
Switch said:
where did you get the ram from and for how much... what are the timings on it...
Click to expand...

I got most of the components from USA. The motherboard was bought in Delhi for 8.5K.

Value Selects are quite cheap but they are not good for OC. My timings are:

CAS Latency CL=2.5
Row Cycle Time tRC Bios Default
Row Refresh Cyc Time tRFC Bios Default
Ras# to CAS# delay tRCD 3
Row to Row delay Bios Default
Min Ras# Active Time tRAS 6
Row Precharge Time tRP 3
Write Recovery Time Bios Default
Write to Read delay Bios Default
Read to Write Delay Bios Default
Refresh Period tREF Bios Default
Enable 2T Timing Disabled

Everest memory benchmarks:
Memory Read: 5671 MB/s
memory Write: 1541 MB/s
Memory Latency: 51.3ns
 
Back
Top