Progress bar runs for 50 times!!!!!!

Hey guyz here is the SMART readings what you wanted, doesn't know what the hell it means, i just downloaded it, executed the file, exported the result n posted it here, i don't know if anything had to be done before or after this test, sorry just a bit amature...PLZ HELP I BEG U ALL PLZ HELP, here are the SMART results now I've also attached the TEXT FILE PLS SEE THX AGAIN IN ADVANCE
Drive 0 SMART enabled

IDE REGISTERS:

Features: 0x0 Sector Count: 0x1 Sector Number: 0x1

Cylinder Low: 0x0 Cylinder High: 0x0 Drive Head: 0xA0

Command: 0xEC

DRIVE INFORMATION:

Serial Number: 3ND25BTM

FirmWare Rev: 3.03

Model Number: ST3200826AS

Cylinders: 16383 Heads: 16 Sectors per track: 63

Cur Cyls: 16383 Cur Heads: 16 Cur Sectors/Track: 63

Bytes per track: NA Bytes per sector: NA

Gen Config: 3162 Buffer Type: 0 Buffer Size: 16384

Vendor Unique: 0 0 0 More Vendor Unique: 0x8010

ECC Size: 4 Double Word IO: 0 Capabilities: 12032

PIO Timing: 512 DMA Timing: 512 BS: 7

Current Sector Capacity: 16514064 Total Addressable Sectors: 268435455

Mult. Sector Stuff: 272 Single Word DMA: 0 Multi Word DMA: 7

SMART ATTRIBUTES:

ID Description Raw Value Status Value Worst Threshold

--------------------------------------------------------------------------------------------

1 Raw Read Error Rate 141761115 OK 50 43 6

3 Spin Up Time 0ms OK 99 98 0

4 Start/Stop Count 620 OK 100 100 20

5 Reallocated Sector Count 1143 OK 72 72 36

7 Seek Error Rate 30729445 OK 75 60 30

9 Power On Time 1224 OK 99 99 0

A Spin Retry Count 0 OK 100 100 97

C Power Cycle Count 643 OK 100 100 20

C2 Temperature 41 C OK 41 50 0

C3 (Unknown attribute) 141761115 OK 50 43 0

C5 Current Pending Sector Count 9 OK 100 100 0

C6 Offline Scan Incorrect. Sector Count 9 OK 100 100 0

C7 Ultra ATA CRC Error Count 14 OK 200 198 0

C8 Write Error Count 0 OK 100 253 0

CA Direct Address Mark Error Rate 0 OK 100 253 0
 

Attachments

  • DriveInfo.txt
    2 KB · Views: 53
Back
Top