Something I have been working on since a while

Status
Not open for further replies.
A

Aakash Anand

Contributor
Its like a Racing Sim Setup but focus on more traditional Driving.

Everything that you see here has been done by me with the exception of Welding.
will keep on improving it lookwise as i progress further but looks great for now.

those who are active in IndianGaming Subreddit has probably seen it already and yes the plastic is only to protect it from dust and dirt.
 

Attachments

  • 1C9F8F6E-BFC5-4EB5-A01D-0DF83CD63EAD.JPG
    1C9F8F6E-BFC5-4EB5-A01D-0DF83CD63EAD.JPG
    236.6 KB · Views: 209
  • ATG Nano Design Simulator 01.png
    ATG Nano Design Simulator 01.png
    581.2 KB · Views: 205
  • ATG Nano Design Simulator 02.png
    ATG Nano Design Simulator 02.png
    441.4 KB · Views: 207
  • ATG Nano Design Simulator 03.png
    ATG Nano Design Simulator 03.png
    566.6 KB · Views: 211
  • IMG_4316.JPG
    IMG_4316.JPG
    377.5 KB · Views: 212
  • Like
  • Wow
  • Love
Reactions: Tobikage, justanotheraverageguy, NightShade007 and 24 others
n1r0 said:
Nice! Curious to know how you wired up the shifter & handbrake
Click to expand...
For Mechanical - Fabricated some parts with CNC, 3D Printer and Scrap from Old Maruti.
For Electrical - Arduino

Figuring out how to make things move mechanically was sure the toughest part.
 
  • Like
Reactions: n1r0
Were any of these parts taken from a Tata Nano? I remember seeing a similar post somewhere on reddit somewhere. Kudos man, will like to see it's working and some gameplay footage.
 
  • Like
Reactions: NightShade007
cattynip said:
Were any of these parts taken from a Tata Nano? I remember seeing a similar post somewhere on reddit somewhere. Kudos man, will like to see it's working and some gameplay footage.
Click to expand...
yea the first picture where it looks all neat and stuff had all the parts from a tata nano and the second one is a mix between nano and dzire.
 
  • Like
Reactions: cattynip
Man, it looks crazy! If I am not mistaken, it's Nano's parts right? It has never looked so nice! Must have taken some great level of planning. Please explain how did you end up connecting the physical gear and handbrakes with the computer. And does the AC vents actually work too?
 
scarletwitch said:
Man, it looks crazy! If I am not mistaken, it's Nano's parts right? It has never looked so nice! Must have taken some great level of planning. Please explain how did you end up connecting the physical gear and handbrakes with the computer. And does the AC vents actually work too?
Click to expand...
yea there's some DC motors inside each fan to mimic the fan of a car, had to take the vent out when I was transporting the dashboard.
 
  • Like
Reactions: scarletwitch
I'm wondering why you did not use bigger screens for a more immersive effect.

Everything else is life size it's just the viewport I think is undersized. They should have been at least twice as tall ideally

Or was this the max size you could fit in there according to scale. Maybe you had budget limitations
 
  • Like
Reactions: Aakash Anand
blr_p said:
I'm wondering why you did not use bigger screens for a more immersive effect.

Everything else is life size it's just the viewport I think is undersized. They should have been at least twice as tall ideally

Or was this the max size you could fit in there according to scale. Maybe you had budget limitations
Click to expand...
First issue was that the instrument cluster panel of the Nano dashboard cannot fit 3*32” in vertically so the next option was 27” inch off branded LED and the other part is that I’m making these to sell now so budget has become an issue as well.
 
n1r0 said:
Do share pics of the gear shift mechanics if you have them
Click to expand...
It’s an actual car gear part and some 3D printed gears connected to handbrake. Nothing fancy.

I can send the pic but that will require me to take the centre console off (which is tightened by screws now).

Altho. I can show you if you can come visit me. Haha
 
Aakash Anand said:
yea there's some DC motors inside each fan to mimic the fan of a car, had to take the vent out when I was transporting the dashboard.
Click to expand...
If possible, do share the photos of the internals. I am really interested to know how did you end up connecting a real handbrake with Arduino. Tweet the final rig photos to Guenter Butschek & Girish Wagh too!
 
Aakash Anand said:
First issue was that the instrument cluster panel of the Nano dashboard cannot fit 3*32” in vertically so the next option was 27” inch off branded LED and the other part is that I’m making these to sell now so budget has become an issue as well.
Click to expand...
What will you do then if some one says they want bigger screens ?
 
Aakash Anand said:
It’s an actual car gear part...
Click to expand...
That's precisely what I've been wondering looking at all the high end sim gear: why can't they just use solid IRL car parts and save money. I'm sure real hydraulic brake systems are cheaper here than the sim ones. And almost all throttle pedals are drive-by-wire and a fraction of the price!

Aakash Anand said:
I can show you if you can come visit me. Haha
Click to expand...
You in Bangalore by any chance? :D


Regarding display height, most people running triple screen will only be seeing through a narrow part, with the rest showing virtual dash and sun blocking sticker on the windshield. So with a real dash in front of you, the narrow vertical view will feel realistic. Eg:

1677061082164.jpeg
 
Last edited:
n1r0 said:
Regarding display height, most people running triple screen will only be seeing through a narrow part, with the rest showing virtual dash and sun blocking sticker on the windshield. So with a real dash in front of you, the narrow vertical view will feel realistic. Eg:

View attachment 161158
Click to expand...
One thing I've learnt about screens. Bigger is always better. However, in this particular case, there might be a reason to use a smaller screen.

Bigger screens exaggerate motion to the point it can be disorienting as a larger part of your view is changing. This may or may not apply to some people. Especially if things are moving fast and continuing to do so as would happen with a race. A smaller screen would reduce that effect.

He should post a photo with the screens on with the same point of view as above
 
Last edited:
n1r0 said:
That's precisely what I've been wondering looking at all the high end sim gear: why can't they just use solid IRL car parts and save money. I'm sure real hydraulic brake systems are cheaper here than the sim ones. And almost all throttle pedals are drive-by-wire and a fraction of the price!


You in Bangalore by any chance? :D


Regarding display height, most people running triple screen will only be seeing through a narrow part, with the rest showing virtual dash and sun blocking sticker on the windshield. So with a real dash in front of you, the narrow vertical view will feel realistic. Eg:

View attachment 161158
Click to expand...

Think its more because how much knowledge and DIY it takes to make something like this by yourself. Also you will be working with the limitations of the design and functionality car parts manufacturer has used whereas a custom sim focused parts will give you a much better feedback and experience tailored towards racing sim.

and no I am in Delhi.
 
  • Like
Reactions: n1r0
Status
Not open for further replies.
Top Bottom