CPU/Mobo Suggest a good overclocking ram kits

Status
Not open for further replies.
D

Dark Star

Innovator
I am looking for some good overclocking kits (4gb -> 2+2) DDR3 1866 / 1600 to go with my Llano setup.

Currently using Corsair XMS3 C9 1600 which isn't very good for overclocking, maximum it can do ~1750-1850 7-9-7-20 depending on the board.

What I am looking is for some ram that can do 2000+ oc for the llano setup. Budget is no constraint but the ram pricing shouldn't be sky high.

Something nearby $100 (INR 5000) should fit the bil.

Please do suggest me a good kit.

Regards
 
^^Well I am looking for quality and that's a flexible budget donno I'll be spending that much or not, just a skeptical budget.

Even I can get more than 4gigs or ram but I don't want to, 1st I have no use :P 2nd I am looking for oc kits :P
 
^^ G.Skill SNIPER Low voltage modules are not good over-clockers.

http://www.techenclave.com/reviews-and-previews/gskill-sniper-f3-12800cl9d-8gbsr2-2x4gb-196736.html -- Fellow TE-ians review.

[1] The best timings I managed to get for the 8 GB kit of the Gskill Sniper were 8-8-9-25 with the stock timings being 9-9-9-24. However others have managed to get 8-8-8-24. I could do better with a better motherboard.

[2] The G.SKILL Sniper 1.25V is actually not designed for overclocking but for low voltage operation, so the user can save some electricity in the process.

[3] It will easily operate at 1.6 Volts without damaging the ram modules or the motherboard.

[4] It will perform better if you happen to be the owner of a P55 or a P67 chipset based motherboard as the Gskill Sniper is designed specifically for those chipsets.

[5] Pushing the frequency was troublesome for me primarily due to the lack of a good chipset (the 785 chipset's heydays are over!). I managed to run it at the rated 1600 MHz.

[6] This Sniper low voltage kit is targeted towards gamers and not towards serious overclockers. The ram offers the best performance at stock settings and is reliable.
Click to expand...
 
Dark Star said:
I am looking for some good overclocking kits (4gb -> 2+2) DDR3 1866 / 1600 to go with my Llano setup.

Currently using Corsair XMS3 C9 1600 which isn't very good for overclocking, maximum it can do ~1750-1850 7-9-7-20 depending on the board.

What I am looking is for some ram that can do 2000+ oc for the llano setup. Budget is no constraint but the ram pricing shouldn't be sky high.

Something nearby $100 (INR 5000) should fit the bil.

Please do suggest me a good kit.

Regards
Click to expand...

I have went through many forum's,most times no major change!!

Well for tht u need one this must be one u r looking into----->Link
 
you can choose from these:

Corsair 2x2GB

Dominator

CMX4GX3M2A1600C7

CMX4GX3M2B2000C9 (available in india can do 7-7-7-20 @1600 )

CMX4GX3M2B2000C9

Gskill

F3-12800CL7D-4GBRM

F3-16000CL9D-4GBRM

do u need need RAM for er0d0v overclocking competition?
 
Status
Not open for further replies.
Top Bottom