Hello..
Your temps are quite high.. what are your ambient temps ?
a remount of the true might be in order.. and if it has been lapped then i hope you have pressure modded it too.
Also are you using the true with 2 fans ? and in what cabinet is this in ?
Anyways
Try these settings below..
Set CPU ratio to 21 and keep everything else as is in the pic.
It should look like this.. except try BCLK frequency of 160. Also select DRAM frequency Manually and set it to 1600mhz or the closest option to 1600 mhz.
Leave eveything else as is.
Now set Cpu Voltage to 1.22v manually instead of the 1.31v as in the pic .
CPU PLL you can leave on auto.
Qpi/Dram Core Voltage set to 1.35v
Leave all IOH and ICH settings on auto instad of the 1.15v as in the pic
Set Dram Bus Voltage to 1.656
Try this and let us know...
If your Ram Specification is for 1.5v then set QPI/DRAM Core Volts to 1.20-1.25v and set DRAM Bus Voltage to 1.51v odd .
Bump up if there is any instability.
Also Set your Ram timings Manually to whatever the specs on the ram is 7-7-7-24 or 8-8-8-24 or whatever is on them
Hope this helps.
Cheers