I found this on the internet .....I dont take any credit for the tutorial...I have added a little bit to it....it works and the easiest tutorial around.....
Pre-requisites:
Wi-fi connection
I configured by Dlink Di-524 to work with my pppoe connection..kept it simple ..no WEP.....nothing....
Duration:10-12mins
This tutorial assumes that your iPhone has firmware version 1.1.1. If you are unsure, here is how to check: On the emergency dial screen dial *3001#12345#* and tap Versions. Firware version should be 04.01.13_G. If it's 03.14.08_G you have v1.0.2 and need to update it to 1.1.1
Part1:Bypass activation and prepare phone for software installation
1.Make sure you have a SIM-card, and power on your phone (the supplied AT&T card works fine).
2.On the activation screen, slide to emergency and dial: *#301# to make the phone call itself.
If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
3.Answer the call, and tap on Hold
4.Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a prefs: and the second is jailbreakme.com Tap Save.
Your contact now has two "web pages" - tap on the first one (prefs
. This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.
5.Now, press the home button, and again, slide to emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, jailbreakme.com
6.Safari will launch and show you a webpage. Read through the text, before you Install AppSnapp
7.Phone will return to activation screen, but don't panic, just wait.
8.Phone should automaticly restart after almost a minute. . If it does not restart withing 2 minutes,try restarting your phone manually.
If phone starts normally everything is fine. If you still only get to the activation screen it did not work. Usually this is because there is a problem on the server, or maybe your internet connection. Wait some time (a few minutes if you are impatient, or a few hour if you want to be sure) and try again.
9.When the phone starts again, it should no longer say Slide to emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation!
At this point the iphone can be used minus the phone features.
Part2:Unlock the SIM-lock
1.On the home screen you should see a blue icon ...named Installer..Tap on it
2.Go to sources(we panicked when we could not find it...it is at the lower right hand side corner....on the black strip of icons) and tap Edit and Add
3.Add this URL:
4.Tap Done and then Refresh
5.Go to Install (at bottom) and scroll down to the Unlocking Tools category and install AnySIM
6.When installed you can press the home button, and you will find a new AnySIM icon on your home screen. Launch it and follow the instructions.
7.The unlocking process will take about 5-10 minutes(you might just get a bit impatient here...cause it is the last step...but be patient), in the end it should say it was successful!
8.To clean up your phone, launch Installer and uninstall AnySIM. Then go to Settings → General → Auto-Lock and set it to a prefered value.
Congratulations, you are done!:clap: :clap: :clap:
*tip to avoid customs ....remove the iphone from the packaging ...keep iphone and its accessories in your bag/pocket ...throw the box ...no one will question you for owning an iphone....or two
Pre-requisites:
Wi-fi connection
I configured by Dlink Di-524 to work with my pppoe connection..kept it simple ..no WEP.....nothing....
Duration:10-12mins
This tutorial assumes that your iPhone has firmware version 1.1.1. If you are unsure, here is how to check: On the emergency dial screen dial *3001#12345#* and tap Versions. Firware version should be 04.01.13_G. If it's 03.14.08_G you have v1.0.2 and need to update it to 1.1.1
Part1:Bypass activation and prepare phone for software installation
1.Make sure you have a SIM-card, and power on your phone (the supplied AT&T card works fine).
2.On the activation screen, slide to emergency and dial: *#301# to make the phone call itself.
If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)
3.Answer the call, and tap on Hold
4.Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a prefs: and the second is jailbreakme.com Tap Save.
Your contact now has two "web pages" - tap on the first one (prefs
. This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.5.Now, press the home button, and again, slide to emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, jailbreakme.com
6.Safari will launch and show you a webpage. Read through the text, before you Install AppSnapp
7.Phone will return to activation screen, but don't panic, just wait.
8.Phone should automaticly restart after almost a minute. . If it does not restart withing 2 minutes,try restarting your phone manually.
If phone starts normally everything is fine. If you still only get to the activation screen it did not work. Usually this is because there is a problem on the server, or maybe your internet connection. Wait some time (a few minutes if you are impatient, or a few hour if you want to be sure) and try again.
9.When the phone starts again, it should no longer say Slide to emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation!
At this point the iphone can be used minus the phone features.
Part2:Unlock the SIM-lock
1.On the home screen you should see a blue icon ...named Installer..Tap on it
2.Go to sources(we panicked when we could not find it...it is at the lower right hand side corner....on the black strip of icons) and tap Edit and Add
3.Add this URL:
PHP:
http://i.unlock.no5.Go to Install (at bottom) and scroll down to the Unlocking Tools category and install AnySIM
6.When installed you can press the home button, and you will find a new AnySIM icon on your home screen. Launch it and follow the instructions.
7.The unlocking process will take about 5-10 minutes(you might just get a bit impatient here...cause it is the last step...but be patient), in the end it should say it was successful!
8.To clean up your phone, launch Installer and uninstall AnySIM. Then go to Settings → General → Auto-Lock and set it to a prefered value.
Congratulations, you are done!:clap: :clap: :clap:
*tip to avoid customs ....remove the iphone from the packaging ...keep iphone and its accessories in your bag/pocket ...throw the box ...no one will question you for owning an iphone....or two
