Wifi 6e 6 Ghz on Quest 3 in India

Status
Not open for further replies.
B

Betak

Contributor
Hi,

www.tp-link.com

AXE5400 Tri-Band Gigabit Wi-Fi 6E Router

Enjoy Wi-Fi 6E connectivity for every device with the Archer AXE75 tri-band Wi-Fi 6E router.
www.tp-link.com www.tp-link.com

I have this router as a dedicated router for PCVR on my Quest 2. It is connected to my PC through the 10 Gbps ethernet port. I use another router for my internet. This is purely for PCVR. I am getting a Quest 3 (imported ) in a few days. I know the 6 Ghz bandwidth is still locked in India.

Question: Will Wifi 6e 6 Ghz work on my Quest 3 through this router?
 
The question is if the router transmits at 6 GHz with an Indian firmware. Legally that is not yet allowed till 6 GHz is freed up for use in India.

If router transmits at 6 GHz, the next question is whether Quest 3 has any region-specific settings, in which case they would disable it for India.

BTW I have a Pico 4 that I use over AX and the available bandwidth is 1.3 GBps whereas streaming is limited to 150 Mbps in most cases, can increase to 400 Mbps through other means. Dedicated 5 GHz is mostly not going to be any different from 6 GHz for this use case depending on what the streaming rate is for the Oculus 3.
 
t3chg33k said:
The question is if the router transmits at 6 GHz with an Indian firmware. Legally that is not yet allowed till 6 GHz is freed up for use in India.

If router transmits at 6 GHz, the next question is whether Quest 3 has any region-specific settings, in which case they would disable it for India.

BTW I have a Pico 4 that I use over AX and the available bandwidth is 1.3 GBps whereas streaming is limited to 150 Mbps in most cases, can increase to 400 Mbps through other means. Dedicated 5 GHz is mostly not going to be any different from 6 GHz for this use case depending on what the streaming rate is for the Oculus 3.
Click to expand...
True. The maximum bitrate through Virtual Desktop is 400 Mbps (h.264+). The quest 2 can't encode more than 200 Mbps, which is why AirLink is capped at 200. Virtual Desktop on the other hand has added AV1 support and bumped the bitrate to 400 for the Quest 3. I wanted to switch to 6 GHz wifi 6e to eliminate network congestion in the 2.4 and 5 GHz bandwidths. There are a LOT of wifi networks in my apartment.
 
  • Like
Reactions: t3chg33k
t3chg33k said:
The question is if the router transmits at 6 GHz with an Indian firmware. Legally that is not yet allowed till 6 GHz is freed up for use in India.
Click to expand...
Wait it's not usable in India? I see so many mobos advertising 6E available for purchase here
 
n1r0 said:
Wait it's not usable in India? I see so many mobos advertising 6E available for purchase here
Click to expand...
The government has not made the 6 GHz spectrum available on an unlicensed basis like the other spectrum. From what I remember, it is mostly a request from the military as they use the same.

Strictly, it is illegal to use the 6 GHz spectrum without license. Both transmitters and clients are not supposed to use it if it is not allowed. I suppose motherboards don't come with region-specific BIOS which keeps the radio enabled. If the router firmware is also not region locked, then you should be able to use it, though it is illegal to do so.
 
  • Like
Reactions: n1r0
t3chg33k said:
...it is mostly a request from the military as they use the same.
Click to expand...
Why does the military care what band Wifi I use at home since 6GHz should get blocked by walls even more easily than 5GHz band, and have even less range?

ibose said:
Looks like everyone is fighting over it -
telecom.economictimes.indiatimes.com

Trai offers 3 options to allocate 6GHz spectrum band - ET Telecom

As part of the hybrid route, Trai said that the lower part of the spectrum band (5925/5945-6425 MHz) can be assigned for unlicensed use and the upper part (6425-7125 MHz) for licensed use.
telecom.economictimes.indiatimes.com telecom.economictimes.indiatimes.com
Click to expand...
Are you confusing WiFi 6 (uses 6GHz band) with 6G (6th generation) mobile network or am I missing something?
 
n1r0 said:
Why does the military care what band Wifi I use at home since 6GHz should get blocked even more easily than 5GHz band, and have even less range?


Are you confusing WiFi 6 (uses 6GHz band) with 6G (6th generation) mobile network or am I missing something?
Click to expand...
Because it causes interference if people around are communicating on the same frequency.

WiFi 6 is not 6 GHz, 6E is. Thing is military, telcos, ISPs as well as equipment manufacturers are fighting over it because of the bandwidth it offers and not having to pay for it if it is released for unlicensed use.

Edit: Military actually uses 6 GHz for satellite phones.
 
  • Like
Reactions: ibose and n1r0
t3chg33k said:
Because it causes interference if people around are communicating on the same frequency.
Click to expand...
They won't actually be using the exact same frequency. For e.g. both Bluetooth and WiFi work on 2.5GHz BAND, but the allocated frequency range for each will be different, and then those are subdivided into channels which is what is actually used by the devices?

t3chg33k said:
WiFi 6 is not 6 GHz, 6E is. Thing is military, telcos, ISPs as well as equipment manufacturers are fighting over it because of the bandwidth it offers and not having to pay for it if it is released for unlicensed use.
Click to expand...
Mobile spectrum was always auctioned, but BT & WiFi in the ISM band were always free for public use right?
 
n1r0 said:
They won't actually be using the exact same frequency. For e.g. both Bluetooth and WiFi work on 2.5GHz BAND, but the allocated frequency range for each will be different, and then those are subdivided into channels which is what is actually used by the devices?


Mobile spectrum was always auctioned, but BT & WiFi in the ISM band were always free for public use right?
Click to expand...
Yeah, 2.4 GHz has always been free and hence used by microwaves, cordless phones, WiFi, Bluetooth. 5 GHz came into use more than a couple of decades back and at that time there was not much demand for it and hence probably it became universal, though governments still blocked part of the spectrum, hence all channels are not available in all countries.

6 GHz probably has become more contentious because governments have realised that income from spectrum can be huge.
 
  • Like
Reactions: n1r0
n1r0 said:
Wait it's not usable in India? I see so many mobos advertising 6E available for purchase here
Click to expand...
This is from another forum. It could work.
 

Attachments

  • Screenshot_20231012-214619~2.png
    Screenshot_20231012-214619~2.png
    219.1 KB · Views: 206
  • Like
Reactions: n1r0 and t3chg33k
t3chg33k said:
The question is if the router transmits at 6 GHz with an Indian firmware. Legally that is not yet allowed till 6 GHz is freed up for use in India.

If router transmits at 6 GHz, the next question is whether Quest 3 has any region-specific settings, in which case they would disable it for India.

BTW I have a Pico 4 that I use over AX and the available bandwidth is 1.3 GBps whereas streaming is limited to 150 Mbps in most cases, can increase to 400 Mbps through other means. Dedicated 5 GHz is mostly not going to be any different from 6 GHz for this use case depending on what the streaming rate is for the Oculus 3.
Click to expand...
Quest 3 is not region locked. But I understand it will be "illegal".
 
Betak said:
Quest 3 is not region locked. But I understand it will be "illegal".
Click to expand...
Only thing is considering Meta is Meta, will it use the Meta account region to limit the band?

Edit: Also seems it hasn't been working on the Quest 3 or Pro mainly due to the Meta and Android software until now.
communityforums.atmeta.com

Quest 3 can’t find Wi-Fi 6ghz

My Quest 3 seems to have a problem with finding Wi-Fi 6ghz network. I tried different things like changing channels, setting factory settings on a router and nothing worked. My Galaxy S23 Ultra and PC is able to connect to Wi-Fi 6ghz without a problem. I’m using asus rt-axe7800 router with...
communityforums.atmeta.com communityforums.atmeta.com
 
  • Like
Reactions: Betak
Status
Not open for further replies.
Top Bottom