Switch
Guide
I have an ASUS A8N SLi Dlx board and an Sapphire X1900XT with a X2 3800. The problem is that when i try to boot my comp with Gfx plugged in the Master PCIe slot and board running in PCIe 16x mode(Non SLi mode/full 16x) the PC doesnt boot at all. Upon making the card switch(The SLi Card to to dual PCIe/SLI/8x mode) the comp boots up. I have tried using a X300 on the while running the Primary PCIe slot in 16x mode and it works great. Infact i had used a X850XT PE on the same slot and it was workig without any problems at 16x mode. Just the X1900XT dosent boot up with card running at 16X. As soon as i switch the SLi card on the board to dual mode/8x each PCIe slot the setup works.
I had tried searching for this issue over google and found nothing. Help me out here guys. The problem exists from the very first day since i tried my X1900XT on my Sli Dlx...
TIA
Switch
I had tried searching for this issue over google and found nothing. Help me out here guys. The problem exists from the very first day since i tried my X1900XT on my Sli Dlx...
TIA
Switch