The "Everyday" show-off thread !

Finally an inverter family

8F66F140-C0FA-496A-9386-2BD5F718E2F5.jpeg
 
Finally an inverter family
is this indoors or outdoors. have some form of ventilation
 
is this indoors or outdoors. have some form of ventilation
The windows are only closed at night else it’s always open. I have asked about the same to the inverter guy before installing them and he said just keep ventilation and you won’t have issue. Now let’s see how this goes. It does smells a bit but it’s might be due to them starting working.
What is the inverter backup and for how much watts or usage is it supporting?
4kva so 3360 something in watt. Full load 3 to 4 hours max. But I don’t have that type of load so expecting at least a 12 hrs backup.
 
does swapping bykski with somewhat similar Ek radiators even help?
These arent similar (PE is 40mm and XE is 60mm) , and the fins are dense , these have 18 fins per inch on XE and 20 on PE, which means better cooling, im also getting a custom front distro plate made which shall replace the barrow side distro plate

and yeah gonna paint or sticker these white, Might take the stickering route with these.
 
Last edited:
Do let us know if you find any improvements, I've got 3 radiators and its so overkill, I run fans at their absolute minimum speed, D5 at 2/5 speed and yet I get decent temps.

and yeah gonna paint or sticker these white, Might take the stickering route with these.
Paint em! I painted mine white too, just have to mask off the fin area and block the ports. I used Nippon pylac matte white on my case and radiators, its come out great. Sticker will never look anywhere as good

 
Back
Top