Post your Rigs !
- Thread starter Darklord
- Start date
nitin_g3
Adept
Nice setup, monitor info please.
immolationepoch
Disciple
Just wanted to share a brief look at the build process for my Dan A4 build based on a template/mod created by u/Losercard on Reddit. I like dense, SFF builds which is what prompted me to shift my components from the very impressive NR200 to the Dan A4. Build made possible by a host of 3D printed parts and custom cables with low-profile connectors. I'd say the build complexity is above-average. Not done tinkering just yet!
If anyone is planning anything similar and has any questions, shoot! Thanks for looking.
If anyone is planning anything similar and has any questions, shoot! Thanks for looking.
Last edited:
raf1988
Disciple
Current Rig Update 2021 -
Note - The camera doesn’t do justice to its actual view in person. In some pictures the RGB was too bright and had to tone down camera focus to get it somewhat right or to make it look good in focus.
Most of the parts are old and will be upgrading soon to 12th Gen mostly. Need to sell current stuff like cpu/mobo/ram/cooler and ‘maybe’ selling either gpus as currently the 3080 Ti is a bottleneck for my cpu (haven’t overclocked it yet).
Also waiting for the Corsair iCUE Elite LCD H170i Liquid Cooler to launch here (This should complete my build).
Side Note - Is anyone familiar with OC? Any help would be appreciated (maybe in person or you could help over video call).
I’m Mumbai based.
PC Specs -
Motherboard -
ASUS ROG MAXIMUS X HERO
CPU Processor -
Intel® Core™ i7-8086K Processor Limited Edition 8th Generation
AIO Liquid Cooler -
CORSAIR Hydro Series™ H115i RGB PLATINUM 280mm Liquid CPU Cooler
AIO Liquid Cooler Accessories-
CableMod AIO Sleeving Kit Series 2 (White)
RAM -
CORSAIR Vengeance RGB Pro 32GB (4 x 8GB) DDR4 DRAM 3200Mhz Memory Kit - Black
GPU -
1. Nvidia - 3080 Ti (Founder’s Edition)
2. Gigabyte AORUS GeForce RTX™ 2080 Ti XTREME 11G
PSU -
CORSAIR AX Series™ AX1000 — 1000 Watt 80 PLUS® Titanium Certified Fully-Modular ATX PSU
PSU + Sleeved Cable Accessories -
Custom Cable Braided Wires:
1. CORSAIR Pro PSU Cable Kit (Black/White)
2. Lian-Li Strimer Plus 24-Pin + 8-Pin Kits
3. CORSAIR Front Panel Extension Kit (White) - 2x Kits
Internal Data Storage -
1. WD_BLACK SN750 with Heatsink 1TB M.2 PCIe NVMe SSD (Operating System)
2. Intel® Optane™ Memory Series 32GB M.2 PCIe NVMe SSD
3. Samsung 860 EVO 2.5" SATA III 500GB SSD
4. Seagate Barracuda ST2000DM006 - 2TB HDD 7200-RPM
5. Seagate Barracuda ST2000DM006 - 2TB HDD 7200-RPM
6. WD Red NAS - 4TB HDD 5400-RPM
Internal Accessories -
1. CORSAIR Commander PRO
2. CORSAIR iCUE Commander Core XT
3. Cooler Master Universal Vertical GPU Holder Kit Ver.2
PC Cooling -
1. CORSAIR iCUE QL140 RGB 140mm PWM Fan (White) - Dual Pack x2
2. CORSAIR iCUE QL120 RGB 120mm PWM Fan (White) - Triple Pack
3. CORSAIR iCUE SP140 RGB ELITE Performance 140mm PWM Fan (White) x2 (Used with AIO)
Internal Aesthetic PC Lighting -
1. CORSAIR iCUE LS100 Smart Lighting Strip Expansion Kit - 2x 450mm, 1x 350mm, 1x 250mm
2. Pirate Dog Tech - Corsair RGB to Aura Adapter (For Lian-Li Strimer Plus RGB Cables to Corsair Commander Pro connection control)
PC Case -
CORSAIR iCUE 7000X RGB Tempered Glass Full-Tower ATX PC Case (White)
Thanks and Cheers!
That's PC has some serious power. I was upgrading my PC recently and although a 10900 would not have made me pinch my wallet, I did not see the use of all the extra computational power. Do you feel you push this PC or rather specifically the CPU or the GPU to its limits?
raf1988
Disciple
It’s my CPU, when gaming on 1440p with some games my CPU load reaches 100% while GPU load is around 80. So it’s clear that my CPU is a bottleneck. This is when paired with 3080Ti, with 2080Ti everything seemed normal and just perfect. When gaming on 4K theres less stress on the CPU.
My cooler does 60-70 degrees max on full load with random spikes to 75 but not for long. My case is collecting a lot of heat with just one rear exhaust fan, everything else is intake, need to rotate my AIO cooler fans to exhaust and that should solve it.
My CPU isn’t overclocked and neither the Ram with XMP on, tried both but got BSOD all the time. Need someone with experience to help with this, then maybe I can keep the current setup for longer and hold out on 12th gen.
KnightstarK
Disciple
Completed my first build a few weeks ago. Everything from the table to CPU was bought recently after months of research and planning.
CPU: AMD Ryzen 3600
RAM: HyperX Fury 3600Hz 8GB x 2
GPU: Gallax 1050 Ti
Motherboard: MSI B550M Pro VDH WiFi
CPU Cooler: Deepcool Gammaxx XT
SSD: Kingston A2000 500GB
HDD: Seagate Barracuda 72000 RPM 1TB x 2
Edit: Apologies for censoring the laptop. I was in the middle of a meeting while taking the photos.
CPU: AMD Ryzen 3600
RAM: HyperX Fury 3600Hz 8GB x 2
GPU: Gallax 1050 Ti
Motherboard: MSI B550M Pro VDH WiFi
CPU Cooler: Deepcool Gammaxx XT
SSD: Kingston A2000 500GB
HDD: Seagate Barracuda 72000 RPM 1TB x 2
Edit: Apologies for censoring the laptop. I was in the middle of a meeting while taking the photos.
Epic lighting and pics. Which keyboard is that?
immolationepoch
Disciple
Nice space. Well done on using a mix of new and used parts for the build! The way to go.
DrkLord
Adept
Not op but i think it is Keychron k1 or k2.
KnightstarK
Disciple
Thanks! Worked really hard to get the vibe "just right".
The keyboard is the Gamakay TK68 (with Gateron Browns). Bought it for 5k from a seller here on TE.
DrkLord
Adept
Nice, that's a good looking rig.
KnightstarK
Disciple
Thanks!
Really grateful to the TE community. The used components saved me about 25k.
Also, I remember you giving great advice on my thread when I was looking to buy a cheap PC table!
eraviii
Disciple
My Simple WFH setup. Occasional playstation time . serves my purpose .
Cable management holder from ikea - Signum
The Monitor Desk shelf is replica from grovemade - DeskShelf
Took those measurements got it done from local carpenter for 1.5k .
Need suggestions on lighting’s RGB stuff to make the desk colourful at nights . More paintings to wall . Long way to go .
Cable management holder from ikea - Signum
The Monitor Desk shelf is replica from grovemade - DeskShelf
Took those measurements got it done from local carpenter for 1.5k .
Need suggestions on lighting’s RGB stuff to make the desk colourful at nights . More paintings to wall . Long way to go .
Attachments
Last edited:
immolationepoch
Disciple
I just got the same kb from Banggood with the Gateron Reds. I'm no kb enthusiast, but wow! Such a pleasure to type on.
Times change