Are all your wiz bulbs & HA server on same wifi network with no "guest" wifi/firewall involved in router settings?
Wiz bulbs turning back on after a power cut
- Thread starter MarioBros
- Start date
MarioBros
Forerunner
yes for all
Same Wifi Network (few devices I have assigned static IPs but not for Wiz bulbs)
No Guest network (had enabled one for some test last week for couple of hours)
No firewall configured.
any reason u asked this ?
Many routers do not allow devices on guest network to interact with usual wifi networks for security by default. In fact it is recommended to use all your smart devices on a guest network because it increases security of your home network by not allowing smart devices to interact with your home network. Reason for this is, smart devices usually have obsolete firmware updates & many security vulnerabilities because their manufacturers don't give much attention to this aspect(there have been many cases of smart devices being turned to botnet). All my smart bulbs & switches are on guest network after initial configuration done on guest network with "allow interaction with home network" option enabled & later disabled as usual.
MarioBros
Forerunner
Oh thats very interesting, after reading ur above inputs just checked online and found this article... I might need ur help for couple of things regarding this setup, will PM u
Why all your IoT devices should be on your guest network | Android Central
There is an option in smart bulbs called something like "last status remember" which is supposed to remember the status of the bulb (on or off) before power cut & once power is restored it remembers & apply that state. This option worked mostly well in wipro bulbs but no such option available in philips wiz bulbs but they do have a "last state" option available which still works most of the time but not via manually turning the physical switch on off assuming your bulb socket has inverter connection.
mantheman
Forerunner
Yes I saw it on wipro and it works 50% of that time. Phillips Wiz app has power outage recover, does not work atm. I will try and tinker it later I guess.
Mi Led bulb works out of the box
I never managed to resolve this issue with my Philips smart bulb. Yet to try the crompton that I got on sale recently. So much for smart.
vamsiambati
Apprentice
Looks like this state remembering only works if the light is in night mode or bedtime is turned on
sriharsha_m
Herald
Like I mentioned in my previous post, these bulbs come with Wizclick enabled from factory and needs to be switched to last status mode.
I have been using a bunch of wiz products for the last couple of years and never faced this issue.
The only time this happened was when I bought a replacement bulb and forgot to disable wiz click mode.
Once disabled, never had them power on after a power failure/restore.
I have been using last status mode since the start with wizclick disabled but till now only thing this feature does is restoring the last "bulb profile state" like cool white/warm etc after a power cut/restore but never the on/off state before power cut.
sriharsha_m
Herald
Are you using the below bulb with wiz V2 app with no google/facebook acc & only using local access with no account? It might be that correct operation of "restore state" mandatory requires using online google/facebook acc to sign in when suing wiz V2 app.
lilcheaty
Apprentice
wiz v2 app solves this with "last status" under the light settings, on/off status stays after bulb is turned off/on, will only turn on if you have a schedule setup or you manually turn it on, maybe try logging in with a dummy email acc like @guest_999 suggested
sriharsha_m
Herald
I use multiple Wiz B22 and E27 bulbs (9, 10 & 12W variants) in floor standers, shades, wall lights. I had been using Wiz V1 app with Google sign in, before migrating data to Wiz V2 as promoted by the app.
Following option is there under Settings >> Current Home >> Others >> Power Outage Recovery.
Following option is there under Settings >> Current Home >> Others >> Power Outage Recovery.
And one would think a native Chinese app (tuya smartlife) would have more chances of having a less intuitive English based app UI than a renowned MNC. This is the first time I even became aware of such setting.
Though this setting didn't work either. I am guessing it needs google/fb sign-in to correctly work as that's the only thing I see as different from your setup.