Search results

Recently built an LXD cluster on couple of Pi 4. Not yet decided what to run on it

Done

I dont have any experience with ceiling mounted APs. I would advise to try re-puposing the existing routers as AP and see if they are good enough. If not try to get pre-owned stuff in reasonably good condition. Instead of getting a high cost single router / AP, buy 2 or 3 and place them...

The same reason forced me to try out this setup You can very well do it without usb adapters if you have vlan capable switch. In typical home network you are not likely to reach the point of bandwidth bottleneck. Even if you do, you can move the interface to a usb adapter then without major...

To install the stock image, just write the downloaded image to an sdcard and boot with it. From there it is just standard Openwrt configuration for your needs Yes, I use TP-Link UE300 As I wanted to run lxc, i built from the sources using the guidelines in the image building section. A...

I have the latest 21.02 version for Raspberry Pi 4 compiled with lxc support. Please message me if you want to try it out

ER-lite has Cavium propreitary offload and it is not supported under Openwrt. You can use software flow offloading though. As per the benchmarks available it should be able to do 400 Mbps symmetric without issues if you are not doing QoS. The ERx is based on MT7621 and hardware offloading...

You can use Openwrt with both Edgerouter X and Edgerouter-lite. Lots of space to to install all the applications you want with a 2 GB USB flash drive

I could not troubleshoot much as this was only a part of a larger project and we couldn't wait to go live

I had done L2 extension with Mikrotik EoIP over L2TP/IPSec for such a case and it is not something that I would consider a success. For unknown reasons file transfers across the EoIP tunnel is fast but Tally is abysmally slow for normal use.

Received LG fast charger, working fine

I had setup xigmanas (previously nas4free) for a friend's business 5 years back. The only issue we had is the usb drive going bad

A video explaining dual WAN links with the Edgerouter lite -

I have used a Mikrotik RB750 for this purpose and it worked well. I had bought it pre-owned for much lesser than its list price

Can you change configuration of Jio Fiber router ? What is the connection method ? DHCP / PPPoE ? Does the Jio Fiber router has a bridge mode ? A router which supports Openwrt / Tomato or Mikrotik / Ubiquiti will be required to do dual WAN. Some high end consumer routers may support dual wan...

The Jio Fiber router doesn't have WiFI ? What is the Asus RT-AC58U for ? If extending the range is the purpose, you should set the Asus RT-AC58U to "Access Point" mode and connect a Cat 6 cable from the LAN port of Jio Fiber router to the LAN port of the Asus RT-AC58U. You should try placing...

I have been a member since 2009 and has not been very active. Recently due to WFH for all family members had to do quite some work on home network. I also noticed there was some posts on networking in TE and am actively participating in such threads. I have also posted a sale thread because due...

You need a router with a guest wifi option to meet that requirement. If you go with dd-wrt / openwrt this is quite easy to achieve

Lookup policy routing. This is possible in DD-WRT, Openwrt etc

Nice experience with robu.in. The inventory is fantastic too