Nice looking BMS.
So thats a 20 cell connector/ port but only 16 is used. Any documentation.
How much current can it dispate per cell during balancing, since this is a passive balancer it will bleed it off by heat.
I will also in the not too distant future will add LFP, so will be keeping a eye on your progress.
For people using regular inverters which use lead acid battery where it will trickle charge after reaching the set voltage. Usually about 100ma to 200ma depending on the size of the battery. So in those conditions a LFP battery connected with a BMS it will the bleed those excess energy as heat. Wondering how this will dispate the heat with no fans. In my inverter when it trickle/float charges the current is below what my shunt can register and in a clamp meter its within the margin of error.