CPU/Mobo 80 GB RAM Suggestion - 4GB X 1 DIMM Modules - 20 Units

Status
Not open for further replies.
harmandeep

harmandeep

VirTuaLiZaTioN Freak
Contributor
Guys, need advice on purchasing 20 Units of 4GB DDR III Dimm modules. We require units which are to able to overclock-able to 200-300 MHz with No or just a Slight increase in their Voltage. Memory Controller will be of AMD C3 Revision Sempron Chips ( all unlocked ).

Systems will be equipped with Sempron + Gigabyte 760G ( new revision with Solid Caps ) and 4GBx2 DIMMs. We specifically require NO SWAP for Applications Private DATA and hence we opt for 8GB systems.

We prefer Gskill/Corsair (heatsink equipped) models.

Throw ur suggestions based upon above Voltage Factor/After Sales Support/1333MHz or 1600MHz/ with HeatSink.

Regards
 
not sure how many slots the board your using has. but if you opt for 2gb x 4 then i can help you out.

i have 4gb kits(2gb x 2). total there are 18 kits. 72gb memory.

its corsair xms3 1333mhz with the heatsink.
 
Would suggest to stay away from the XMS3 1333. I was only able to get a 5Mhz overclock from them till 205. On 206, found that the system was unstable. However, did not increase the voltage.

IMO, if you are on a tight budget, get the XMS3 1600, but would suggest the vengeance.
 
Status
Not open for further replies.
Top Bottom