BEST SPRAY for Computer Cleaning

Status
Not open for further replies.
terence_fdes

terence_fdes

wizened Dinosaur
Innovator
Hi TE Folks

Inviting your own feedback
What is BEST SPRAY for Computer Cleaning / Electronic Parts

This is my experience with NIKAVI - Dries super fast (in seconds) & removes all dirt/corrosion and you can use a blow-dryer too. I have used it on my Monitors (terminals); RAM Slots; PCB too; Logitech Mechanical keyboard & Mouse; plus on my water cooling loop.
AND ITS DAMM CHEAP - just Rs 263 for 400 ml
NIKAVI Spray

Other option I considered was WD40 Specialist - But price was a whopping Rs 2348 for just 325 ml.
WD40 Specialist

Do you have other recommendations that are proven SAFE and reasonably priced.
 

Attachments

  • Comp_Cleaning_01.jpg
    Comp_Cleaning_01.jpg
    192.9 KB · Views: 189
  • Like
Reactions: rsaeon, Synth-Pop, Futureized and 3 others
letmein said:
What's the difference between this and a compressed air can?
Click to expand...
I suppose a compressed air can (as any blow-dryer) will do only a certain part of the job - whereas using a chemical spray will also ensure a better job of removing 'corrosion, stubborn dirt/dust particles' and re-juvenating the connectivity between your contact points.
 
  • Like
Reactions: joy.das.jd
Where do you get compressed air can for cheap. They are exorbitant priced everywhere.

For the time being i use just the blower side of vaccum cleaner. The force of air is not much but it gets most of the job done pretty good.

And if the surface can be accessed then i use IPA to clean the surface. Never had any issues with IPA. Old toothbrush + IPA is my go to solution for all electronics cleanup.
 
  • Like
Reactions: Sohamsdays, FXGalvatron and terence_fdes
+1 for IPA.

This is my stock that I use for resin 3D printing as well as cleaning just about anything electronic.

20220728_153848.jpg

Emplura is the slightly lower quality line intended for lab work, but still quite high quality and cost me around 1950 for 2.5 litres. I go for this as it can be further diluted if your application demands. Available from nearby lab supplies place.

I always keep it handy in a small spray bottle.

20220728_153932.jpg
 
Last edited:
  • Like
Reactions: stefanm and terence_fdes
terence_fdes said:
I suppose a compressed air can (as any blow-dryer) will do only a certain part of the job - whereas using a chemical spray will also ensure a better job of removing 'corrosion, stubborn dirt/dust particles' and re-juvenating the connectivity between your contact points.
Click to expand...
Any idea what the chemical is? I didn't see anything informative on the can.

Or can we assume it's just diluted IPA in a compressed air can?
joy.das.jd said:
Where do you get compressed air can for cheap. They are exorbitant priced everywhere.
Click to expand...
You can't. This is why I use a battery-operated blower like the one in this comparison. The second gen of that blower which even has a vacuum seems to be going for song right now.
 
Last edited:
  • Like
Reactions: terence_fdes
blr_p said:
See link . I just noticed the second one going for almost half I paid two years ago
Click to expand...
Still too expensive. My EUREKA FORBES vaccum cleaner cost me 8k that i bought last year. The blower is okay type.

But i do have an old Eureka forbes at home in Kolkata. Old style , big boxy style one and makes an airplane takeoff type noise. But damn that machine is one heck of powerful one. Both the suction and blower is way more powerful than the puny machines available today.
 
  • Like
Reactions: terence_fdes
blr_p said:
Any idea what the chemical is? I didn't see anything informative on the can.

Or can we assume it's just diluted IPA in a compressed air can?

You can't. This is why I use a battery-operated blower like the one in this comparison. The second gen of that blower which even has a vacuum seems to be going for song right now.
Click to expand...
Sincerely no idea about the composition (i.e what chemical is used) and they should have mentioned it...... BUT IT WORKS like a charm.
 
salian said:
+1 for IPA.

This is my stock that I use for resin 3D printing as well as cleaning just about anything electronic.

View attachment 141016

Emplura is the slightly lower quality line intended for lab work, but still quite high quality and cost me around 1950 for 2.5 litres. I go for this as it can be further diluted if your application demands. Available from nearby lab supplies place.

I always keep it handy in a small spray bottle.

View attachment 141017
Click to expand...
That's my go to, especially screens as you don't want anything water based, like Colin etc. Especially don't let maids near electronics.
 
  • Like
Reactions: terence_fdes
have been stalling cleaning the desktops in dad's office. how many cans do you think i'll need for around 20 desktops?
 
shivp0ster said:
have been stalling cleaning the desktops in dad's office. how many cans do you think i'll need for around 20 desktops?
Click to expand...
I think just 1-2 cans of NIKAVI can do the job for 20 desktops.

NOTE HOWEVER:
BEFORE YOU USE NIKAVI or any Other Solution (even IPA - if needed) - Follow the Steps Below
1. Use a Vacuum Cleaner / Blower to clean all visible dust
2. Remove RAMs (you can spray on RAM and the Slots) - then after 5-10 mins Clean edges with a Satin Cloth or Good Tissue Paper (blow dry the RAMs too later)
3. Spray on all other contacts of PC - where necessary disconnect & clean too (including USB Slots).
4. Use a Cloth or Tissue Paper to REALLY Clean off Dirt from PC/Cables etc
4. Lastly - USE A BLOW DRYER ..... For 100% satisfaction of having DRIED out All Components

Simple Solutions - I have suggested NIKAVI as it Dries Extremely FAST.
 
stefanm said:
That's my go to, especially screens as you don't want anything water based, like Colin etc. Especially don't let maids near electronics.
Click to expand...
What cloth do you use to clean the screen?

I have some dirt stuck in laptop screen. But not sure what to use. I have some high GSM microfiber cloth (400+ GSM which I use for car cleaning). But they seem too coarse to use on a delicate screen.

The cloth that is given in spectacle boxes seem to be best suited for cleaning screens. But that is a tiny bit of cloth. Not able to find anything larger but of similar material.
 
hotshot05 said:
What cloth do you use to clean the screen?

I have some dirt stuck in laptop screen. But not sure what to use. I have some high GSM microfiber cloth (400+ GSM which I use for car cleaning). But they seem too coarse to use on a delicate screen.

The cloth that is given in spectacle boxes seem to be best suited for cleaning screens. But that is a tiny bit of cloth. Not able to find anything larger but of similar material.
Click to expand...
I use either a microfibre towel or the ones from specs cases, my preference is the latter.
 
  • Like
Reactions: terence_fdes
Found this wonderful guide , pretty sure will be helpful to each one of us
www.chemtronics.com

Ultimate Guide to Cleaning Electronics

In the process of assembling, reworking or repairing printed circuit boards (PCB) for electronic devices, the discussion inevitably turns to whether or not to clean the PCB. Cleaning adds time and expense to the process, and doing it wrong can cause more harm than good. This guide will walk you...
www.chemtronics.com www.chemtronics.com
 
  • Like
Reactions: Gooner and terence_fdes
NanditaRoy said:
Found this wonderful guide , pretty sure will be helpful to each one of us
www.chemtronics.com

Ultimate Guide to Cleaning Electronics

In the process of assembling, reworking or repairing printed circuit boards (PCB) for electronic devices, the discussion inevitably turns to whether or not to clean the PCB. Cleaning adds time and expense to the process, and doing it wrong can cause more harm than good. This guide will walk you...
www.chemtronics.com www.chemtronics.com
Click to expand...
Very informative @NanditaRoy - Welcome to TE
 
  • Like
Reactions: NanditaRoy
hotshot05 said:
The cloth that is given in spectacle boxes seem to be best suited for cleaning screens. But that is a tiny bit of cloth. Not able to find anything larger but of similar material.
Click to expand...
Plenty of these available on Amazon, search for microfiber cloths. The quality might vary, some of them leave lint. Decathlon sells washable ones for 50.
 
calvin1719 said:
Plenty of these available on Amazon, search for microfiber cloths. The quality might vary, some of them leave lint. Decathlon sells washable ones for 50.
Click to expand...
+1 for decathlon's microfiber cloths. I had bought it for a similar purpose, better quality compared to the ones on amazon.
 
Status
Not open for further replies.
Top Bottom