Bypassing Jio Fiber Router/ONT -Guide
- Thread starter anmolbhard004
- Start date
AlphaRishi
Apprentice
k_m_Arya
Galvanizer
TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store
Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
ltonlinestore.com
This will work. I’m currently using it myself, also purchased from the same website.
AlphaRishi
Apprentice
Got it. Just ordered it. I was not sure if I should order from this website or not. Got a lot of reviews that it is a fraud. But since you already got it. I ll purchase it. Thanks.TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store
Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
This will work. I’m currently using it myself, also purchased from the same website.
this website is not fraud , I have also purchased from this website , something else
I ordered this recently and this is working very good. https://fgtechstore.com/product/tp-link-xx530v/
AlphaRishi
Apprentice
Okay I have successfully bypassed Jio ONT using the provided TP Link XZ000-G3 GPON unit. I have done the following things:
1. My JIO firmware starts with ARCN so I used that for the serial number
2. Converted it to hex and appended the last 8 digits of my mac address
3. Put that in GPON SN and in VLAN set the tag to 1015
4. I am using a TP Link Archer C6 v4 router where I cloned the MAC address of my jio router.
Connection got established. BUT I am facing one problem
Now if I restart my router and the GPON unit, I don't have internet connection. I don't get assigned any IP adress dynamically. (I have set dyanmic IP in my tp link router). To get my internet working I have to press release and renew in the router settings and then I get an IP assigned. How do I solve this?
Reference steps: https://broadband.forum/threads/how...ssing-the-jiofiber-router.221140/post-1673568
1. My JIO firmware starts with ARCN so I used that for the serial number
2. Converted it to hex and appended the last 8 digits of my mac address
3. Put that in GPON SN and in VLAN set the tag to 1015
4. I am using a TP Link Archer C6 v4 router where I cloned the MAC address of my jio router.
Connection got established. BUT I am facing one problem
Now if I restart my router and the GPON unit, I don't have internet connection. I don't get assigned any IP adress dynamically. (I have set dyanmic IP in my tp link router). To get my internet working I have to press release and renew in the router settings and then I get an IP assigned. How do I solve this?
UPDATE: Got it resolved. The issue was dhcp was enabled on the GPON terminal as well, which was causing that issue it seems. Resolved it by disabling that.Okay I have successfully bypassed Jio ONT using the provided TP Link XZ000-G3 GPON unit. I have done the following things:
1. My JIO firmware starts with ARCN so I used that for the serial number
2. Converted it to hex and appended the last 8 digits of my mac address
3. Put that in GPON SN and in VLAN set the tag to 1015
4. I am using a TP Link Archer C6 v4 router where I cloned the MAC address of my jio router.
Connection got established. BUT I am facing one problem
Now if I restart my router and the GPON unit, I don't have internet connection. I don't get assigned any IP adress dynamically. (I have set dyanmic IP in my tp link router). To get my internet working I have to press release and renew in the router settings and then I get an IP assigned. How do I solve this?
Reference steps: https://broadband.forum/threads/how...ssing-the-jiofiber-router.221140/post-1673568
Last edited:
ddeswal99
Beginner
Hey I have vsol and arcn router too. Did you take hex of arcn only and added mac or whole hex of arcn + mac
AlphaRishi
Apprentice
Footprint4320
Apprentice
For those who are able to telnet into Jio HGW , you can get the serial from `
/var/romfile.cfg`, at least on the SCOM unit.
Code:
RIL> grep SerialNumber /var/romfile.cfg
<ONU Version="RP0201" VendorId="4899" SerialNumber="SCOMXXXXXXXX" Password="00000001"....Footprint4320
Apprentice
In addition to this, you can also transfer this file (and any other) from within the router to your System using netcat. Unfortunately the busybox binary included in the unit is pretty basic , but I was able to workaround by downloading this static build of busybox into
/flash2 and execute ./busybox nc successfullytirth0jain
Discoverer
What delivery option you picked and how long did it take to arrive?TP link XZ000-G3 1-Port Gigabit GPON Terminal – Rs.1290 – LT Online Store
Specifications Quality of Service-Quality of Service control for transaction prioritization and bandwidth management Durability-Intelligent power-saving method Easy Remote Management-TR-069 protocol enables an operator to remotely configure and manage end-user devices Full Gigabit Port-Fiber...
This will work. I’m currently using it myself, also purchased from the same website.
Footprint4320
Apprentice
I picked trackon, it arrived in 4 business days (Ordered on Monday early morning) . Although i suggest going for G7, iirc it is XPON, and ive read it is supported well. And it is like 200rs cheaper