41-50k Home PC + ML config by next year

Status
Not open for further replies.
sunily said:
Got everything today and tried to assemble system and found motherboard is dead. TheItDepot said take to service center since it's 10+ days. Bad experience with Asrock. Even took to local shop and replaced everything PSU, ram, GPU, CPU, but no luck. Same components working on other MSI Mobo
Post automatically merged:

System showing Asrock logo then going blank.
Click to expand...
Does the Mobo has Bios flashback button in its I/O area. If you have then use it flash the latest bios from Asrock website.
 
bssunilreddy said:
I think it's better to go with 1kva
Click to expand...
Does 650VA can't even support for 5 mins? My system is not consuming full power of 550. How does PSU work? It draw power what is actually required, like in my case it is less than 400W if I calculate or it draw power as per PSU Wattage whether that can be consumed or not.
 
sunily said:
Does 650VA can't even support for 5 mins? My system is not consuming full power of 550. How does PSU work? It draw power what is actually required, like in my case it is less than 400W if I calculate or it draw power as per PSU Wattage whether that can be consumed or not.
Click to expand...
31xpmw1.png

https://outervision.com/b/2fJZ3q
So you need 700VA UPS based on all the components you are gonna use.
 
sunily said:
I saw a Microtech UPS of 650 VA. Does that work? There is no 700VA and 1 KVA is out of my budget as of now. Entire rig costed 60k where as my budget was 50k (max side)
Click to expand...

Check if Cyberpower models are available.
Post automatically merged:

sunily said:
Does 650VA can't even support for 5 mins? My system is not consuming full power of 550. How does PSU work? It draw power what is actually required, like in my case it is less than 400W if I calculate or it draw power as per PSU Wattage whether that can be consumed or not.
Click to expand...

It draws whatever required. But depends on efficiency as well. E.g. if it is rated at 80, for providing 400W of power, it will draw 500W from wall plug.

For UPS, general thumb rule is factor of 0.6. So if you need say 420W of power, UPS should be about 700VA.
 
Hi,
Finally system is up and running. Here are some snaps. Though I have to re-cable it again as I only fitted components to test if all ok now.
Need some tips on cabling. Should I route unused PSU cables on back side? I am not sure if that hole is big enough to send all those wires on back other side.

Asrock B450M Pro4-F
Ryzen 5 3600
GSkill Ripjaws 3200 MHz 8GB * 2
Samsung 860 EVO 250GB
LG 24MP59G IPS Panel
Corsair CX550
TP-Link wifi dongle
Zotac 1050 ti 4GB (resale)
CM Storm (old)
HDD 500GB * 3 (old)
HDD 2TB * 1 (old)
Windows 10 Pro 64 bit
Post automatically merged:

I am yet to decide on UPS part. I checked with local shop and he said if I take Microtek 650VA and it won't work then he won't take it back as it will become open piece.
And 1000VA UPS is out of budget now.
Post automatically merged:

bssunilreddy said:
31xpmw1.png

https://outervision.com/b/2fJZ3q
So you need 700VA UPS based on all the components you are gonna use.
Click to expand...

I corrected the figures here as I am using 1 SSD and 4 SATA (not 6).
Also 1 120mm fan (not 3). This is the output of UPS recommendation I got.

 

Attachments

  • 1.JPG
    1.JPG
    150.8 KB · Views: 229
  • 2.JPG
    2.JPG
    162.7 KB · Views: 218
  • 3.JPG
    3.JPG
    114.1 KB · Views: 224
  • 4.jpg
    4.jpg
    187.1 KB · Views: 230
  • 5.JPG
    5.JPG
    90.5 KB · Views: 219
  • UPS.JPG
    UPS.JPG
    43.5 KB · Views: 207
Last edited:
  • Like
Reactions: vyral_143
Asrock B450M Pro4-F - 6900 (from ITDepot including shipping)
Ryzen 5 3600 - 16500
GSkill Ripjaws 3200 MHz 8GB * 2 - 6300
Samsung 860 EVO 250GB - 3900
LG 24MP59G IPS Panel - 8500
Corsair CX550 - 4300
TP-Link wifi dongle - 500
Zotac 1050 ti 4GB (resale) - 6250
CM Storm (resale) - 2500
Windows 10 64 bit - 500
Keyboard, Mouse, Speaker - old

Total - 56150

Still looking for UPS, so consider 60k damage for entire config.
 
  • Like
Reactions: bssunilreddy and hellblazer33
With several models in Machine Learning, you will be limited by the GPU memory. Its not that it will run slower, the problem is that it may not run at all. I am talking about CNN and ANN. So if your dataset is 6GB and your graphic card is 4GB RAM model, you won't be able to use it. And better get used to using Linux if want to pursue this field.
 
baccilus said:
With several models in Machine Learning, you will be limited by the GPU memory. Its not that it will run slower, the problem is that it may not run at all. I am talking about CNN and ANN. So if your dataset is 6GB and your graphic card is 4GB RAM model, you won't be able to use it. And better get used to using Linux if want to pursue this field.
Click to expand...

Is 2070super enough if I want to do ml ?
 
Status
Not open for further replies.
Top Bottom